Pelco C3453M-B manual Description, Models

Description

The EH1512 Series indoor/outdoor enclosures are designed for use with small- to medium-sized analog and IP cameras. They will accommodate both fixed and variable focal length lenses (with or without auto-iris operation). They can be wall mounted using either Pelco’s EM1512 (feedthrough wall mount) or any light to medium duty mount.

The tethered, removable enclosure lid provides easy access during installation and when camera and lens adjustments are necessary. Power and video cabling is brought into the enclosure through two adjustable glands (PG9 and PG11) on the bottom of the enclosure, allowing for easy installation.

Field-installed options include a heater/blower with a 24 VAC camera power supply and sun shroud. The enclosures can also be ordered from the factory with a 24 VAC, 120 VAC, or 230 VAC heater/blower with a 24 VAC camera power supply. If your enclosure has a thermostatically controlled heater, the thermostat is set to activate at 50°F (10°C) and turn off at 80°F (27°C). The blower operates continuously.

NOTE: A metric Allen wrench (5 mm) and a Phillips screwdriver are required for installation but are not included. A flat head screwdriver might also be needed for all models except the EH1512 and EH1512MT. The Allen wrench is needed to secure the enclosure to all mounts. It is also needed to open and close the enclosure and to secure the pan/tilt (swivel head) on the EM1512 mount.

MODELS

EH1512	Enclosure, indoor/outdoor.
EH1512MT	Same as EH1512 with an EM1512 feedthrough wall mount.
EH1512-1	Same as EH1512 with a 120 VAC heater/blower with 24 VAC camera power (includes the 4-inch wire tie).
EH1512-2	Same as EH1512 with a 24 VAC heater/blower with 24 VAC camera power.
EH1512-3	Same as EH1512 with a 230 VAC heater/blower with 24 VAC camera power (includes the 4-inch wire tie).
EH1512-1MT	Same as EH1512 with a 120 VAC heater/blower with 24 VAC camera power and an EM1512 feedthrough wall mount
	(includes the 4-inch wire tie).
EH1512-2MT	Same as EH1512 with a 24 VAC heater/blower with 24 VAC camera power and an EM1512 feedthrough wall mount.
EH1512-3MT	Same as EH1512 with a 230 VAC heater/blower with 24 VAC camera power and an EM1512 feedthrough wall mount
	(includes the 4-inch wire tie).
EH1512-1MTS	Same as EH1512 with a 120 VAC heater/blower with 24 VAC camera power, an EM1512 feedthrough wall mount (includes
	the 4-inch wire tie), and an SS1512 sun shroud.
EH1512-2MTS	Same as EH1512 with a 24 VAC heater/blower with 24 VAC camera power, an EM1512 feedthrough wall mount, and an
	SS1512 sun shroud.
EH1512-3MTS	Same as EH1512 with a 230 VAC heater/blower with 24 VAC camera power, an EM1512 feedthrough wall mount (includes
	the 4-inch wire tie), and an SS1512 sun shroud.

4 C3453M-B (4/09)