Pelco Enhance Privacy with Window Blanking on CM6800 Home Security Systems
Page 63

WINDOW BLANKING

SPECTRA IV

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

WINDOW BLANKING

Window blanking allows a user to program four-sided areas that cannot be viewed by the operator of the dome system. A blanked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide.

The 16X and 23X models have one user-defined window blank available. The 22X and 35X models have eight available user-defined window blanks.

Spectra IV and Spectra IV SE dome systems have two styles of window blanking: Gray and Smear. If the style is set to Gray, the blanked area is covered with a solid gray window. If Smear is selected images behind the window will be noticeable but not distinguishable.

To set a window blanking area:

1.Use the joystick to position the cursor beside WINDOW BLANKING. Press Iris Open. The WINDOW BLANKING menu appears on the screen.

2.Move the joystick to position the cursor beside SET WINDOWS. Press Iris Open to enter.

3.Position the cursor beside WINDOW NUMBER. Press Iris Open. The cursor moves to the right.

4.Move the joystick up or down to view selections. Press Iris Open to enter selection.

5.Use the joystick to position the cursor beside EDIT WINDOW LOCATION. Press Iris Open, and then follow the instructions that appear on the screen. When all four corners are set, the SET WINDOWS menu reappears, the blanked area is displayed, and the ENABLE WINDOW option is set to YES.

NOTES:

STYLE

BLANK ALL ABOVE BLANK ALL BELOW

<SET WINDOWS>

BACK

EXIT

•Use the inside corner of the window selection tool as a guide when selecting the upper left, upper right, bottom right, and bottom left corners of the window.

•Set windows are not visible when editing a new window location.

INSIDE CORNER

SET WINDOWS

 

WINDOW NUMBER

 

<EDIT WINDOW LOCATION>

 

<EDIT WINDOW ZOOM>

 

<EDIT SCHEDULE>

 

ENABLE WINDOW

 

REVERSE

 

CLEAR WINDOW

 

BACK

 

EXIT

*This setting applies only to Pressurized Spectra IV dome systems.

C3412M (9/06)

63

Page 62 Page 64
Image 63
Page 62 Page 64
Contents Spectra IV Spectra IV SE Series Dome Drives Page Contents Blank All Above/Blank All Below Activate Aux Current Reading Reset Alert Welcome SW1 Receiver Address InstallationSwitch Settings SW2 Switches 1-3 Special System SettingsSW2 Switches 6-8 Baud Settings SW2 Switches 4-5 Serial Port SettingsDome Drive Installation Dome Drive InstallationTable A. Switch Settings for SW1 P-Type Control Spectra Switch Setting Address Table B. Switch Settings for SW1 D-Type ControlTable B. Switch Settings for SW1 D-Type Control 100 106 141 176 211 246 Getting Started Configure DoneHow to Operate Your Dome System Quick Programming Guide Accessing Main Menu PresetPress the Spot Monitor key CM9500NET300/NET350/NET4001A 16X LowLight Color Menu Tree Dome Settings Camera 22X EXview LowLight Black-White Menu Tree Reference Information Azimuth Elevation Zoom 22X EXview LowLight Color Menu Tree Alarm Settings AUX Alarm Number AUX 1 Mode 23X LowLight Day/Night Menu Tree Line Sync Presets Edit Detection Areas Preset Number 35X LowLight Day/Night Menu Tree Uvwxy Date Format MM/DD/YYYY Edit Event Label Language Exit Additional System InformationDisplay Setup Label Positions Auto Focus Dome SettingsCamera Type of Lighting16X Models DD4TC16 and DD4TC16-X Zoom LimitLOW Zoom SpeedLOW Light Limit HighDark IR CUT FilterNumeric Value Advanced Camera SettingsShutter Speed AGC LimitAuto iris is disabled, and control is always manual Determined by the auto iris level settingAuto Iris Gain Level. Sharpness level settings range fromAuto Sharpness Auto White BalanceThere are two backlight compensation settings OFF defaultBacklight Compensation BLC Normal Video LevelWide Dynamic Range Set the video output to one of the followingApplies only to 35X models Electronic Image StabilizationProportional PAN Motion SettingsThere are two auto flip modes On default Auto FlipFrame Scan PresetPark Time Auto ScanImage is never frozen Preset Freeze FrameThere are three preset freeze frame settings Scan SpeedStop is reached Limit StopsManual ScanAzimuth Zero Power UP Power UP ActionNone Settings range from 0-359 degrees Line SyncDome synchronizes to the internal clock Presets Following presets are predefined for specific functionsSpectra Becomes C3412M 9/06 Edit Detection Areas Enable Motion DetectionMotion Detection Areas Edit Schedule Activate AUX CommandTriggers a command to AUX AUX TimePatterns Zones To set a window blanking area Window BlankingClear Window ReverseBlanks everything below a user-defined tilt angle Blank ALL ABOVE/BLANK ALL belowSequence AlarmsReset Delay ResumeMEDIUM/LOW Normally open AUX LatchingMomentary Edit Title Text Title TextRepeat AlertCurrent Reading Reset AlertACK Action Activate AUXClear Password Power Line ClockFixed Date Repeat steps b-d for the ending date and time Follow the instructions in for Fixed DATE, adding Week Event Event TypeEvent Label Edit Event Label Edit Event LabelEdit Event Date is in the list of holidaysHolidays have no effect on the event Clear Event List EventHoliday Edit Holiday Holiday occurs on the same date each yearApril List Holidays Clear HolidayUse this page to record scheduled events Scheduled EventsReboot System Reset, Cycle Power, RebootReset Camera Cycle Camera PowerSoftware/Language File Upload Suggested Preventative Maintenance PAL Specifications16X Models NtscLux at 1/1.5 sec. shutter speed 22X Models Monochrome3.9/6.3 seconds Lux at 1/2 sec. shutter speedDD4C22 22X Models ColorInterlace Inch CCD 23X ModelsZoom Speed 4.2/5.8 seconds Horizontal Angle of View Lux at 1/50 sec. shutter speed B-WLux at 1/1.5 sec. shutter speed B-W DD4CBW35 35X ModelsZoom Speed 4.6/6.6 seconds Horizontal Angle of View Lux at 1/50 sec. shutter speed colorLux at 1/3 sec. shutter speed color Product Warranty and Return Information ISO9001
Related manuals
Manual 80 pages 19.54 Kb

IV SE specifications

The Pelco IV SE is a leading-edge camera system designed specifically for surveillance applications that demand high-quality imaging, flexibility, and robustness. With its sleek design and advanced features, the Pelco IV SE is an essential tool for security professionals aiming to enhance situational awareness and improve monitoring capabilities.

One of the key features of the Pelco IV SE is its impressive image quality. The camera is equipped with advanced image sensors that provide high resolution and clarity, ensuring that critical details are captured even in challenging lighting conditions. Its enhanced low-light performance enables efficient operation in darkness, making it suitable for both day and night surveillance tasks.

In terms of technology, the Pelco IV SE incorporates advanced video compression algorithms, such as H.264 and H.265. These technologies allow for efficient bandwidth utilization while maintaining video quality, enabling long-term storage of data without sacrificing clarity. The camera also supports Power over Ethernet (PoE), simplifying installation by allowing power and data to be transmitted over a single cable, reducing clutter and setup complexity.

Another standout characteristic is its flexibility. The Pelco IV SE is designed for various mounting options, including wall, ceiling, and pole mounts, making it adaptable for different environments and surveillance needs. The camera features a varifocal lens, allowing users to adjust the field of view to capture images from different distances, thus optimizing surveillance coverage.

Additionally, the Pelco IV SE integrates seamlessly with existing security systems, providing compatibility with various video management software platforms. This interoperability ensures that users can incorporate the camera into their broader security infrastructure without significant disruption.

The device also comes with intelligent video analytics capabilities, such as motion detection and facial recognition, enhancing its functionality. These features allow for proactive monitoring, where alerts can be set up for suspicious activities, ensuring timely responses to potential threats.

With its robust construction, the Pelco IV SE is built to withstand harsh environmental conditions. It adheres to specific IP ratings, indicating its resistance to dust and water, making it an ideal choice for both indoor and outdoor surveillance applications. In summary, the Pelco IV SE is a versatile, high-performance camera that combines advanced imaging capabilities, reliable technology, and extensive adaptability to meet the evolving demands of modern security surveillance.
Top Page Image Contents