Yamaha RX-V730 Connecting the AM loop antenna, 75-ohm/300-ohm antenna adapter U.K. model

Page 21

Both AM and FM indoor antennas are included with this unit. In general, these antennas should provide sufficient signal strength.

Connect each antenna correctly to the designated terminals.

(included)

 

Indoor FM

 

 

antenna

AM loop antenna

_

(included)

 

Ground (GND terminal)

For maximum safety and minimum

interference, connect the antenna GND

terminal to a good earth ground. A good

earth ground is a metal stake driven into moist earth.

75-ohm/300-ohm antenna adapter (U.K. model)

 

 

11 (7/16)

 

 

 

 

8 (5/16)

Unit:

 

 

 

6 (1/14)

mm

(inch)

Open the

cover of the

Cut the external

sleeve

included 75-ohm/300-ohm

of the 75-ohm

coaxial

antenna

adapter,

cable and prepare

it for

 

 

connection.

 

 

3

Lead wire

Cut the lead wire and remove it.

Clamp _

Clamp with

with H-_pliers.

p,,ersI1 1

 

 

 

 

Snap the cover into

 

I_2

r:hh

el _t!re

place.

Insert the cable

wire

into

the

 

slot, and clamp

it with

pliers.

 

_ioli'ffl_iNi'F

•Connecting the AM loop antenna

[] Set up the AM loop antenna, then connect it.

i

[] Press and hold the tab to insert the AM loop

antenna lead wires into the AM ANT and GND terminals.

Orient the AM loop antenna for the best reception.

•The AM loop antenna should be placed away from this unit.

•The AM loop antenna should always be connected, even if an

outdoor AM antenna is connected to this unit.

A properly installed outdoor antenna provides clearer

reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the

quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas.

FREQUENCY STEP switch (China and General

models)

differs in different areas, set the FREQUENCYBecause the interstationSTEP switchfrequency(locatedspacingon

the rear panel) according to the frequency spacing in your area.

North, Central and South America:

100 kHz/10 kHz

Other area: 50 kHz/9 kHz

Before setting this switch, disconnect the AC power plug of this unit from the AC outlet.

17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Page Riskof Electricshock Donotopen Ansi FOG Information for US customers onlyNfpa FCCWe Want You Listening For a Lifetime For Canadian CustomersYamaha Contents Features Getting Started Processing About this manualDIGITAL. EX Korea and General models A., Canada, China75-ohm/300-ohm antenna Europe, U.K., Australia Adapter U.K. model Singapore modelsInput Mode Remote control sensorFront panel display STANDBY/ONPRESET/TUNING Edit Tuning Mode AUTO/MANL MonoMemory MANL/AUTO FM Level Standby@ Test RE-NAMESelect A/V Handling the remote controlSET Menu I1 on ScreenTuned indicator Volume level indicatorMemory indicator Auto indicatorMain speakers Use of a subwoofer expands your sound fieldCenter speaker Rear speakersSpeaker cables Connecting to the SpeakersTerminals Main Speakers terminalsMain Speaker Right Left Center Subwoofer Rear center System Subwoofer jackImpedance Selector switch SwitchImpedance Selector Connecting to digital jacks Connecting a DVD player/digital TV/cable TV Connecting a video monitorConnecting a game console or Camcorder Connecting a VCR or DVR digital Video recorderVideo monitor Indicates Signal Direction Left analog Cables Right AnalogConnecting a CD recorder or MD Connecting a CD playerConnecting a turntable RecorderFrequency Step switch China and General Models Connecting the AM loop antenna75-ohm/300-ohm antenna adapter U.K. model Included Indoor FM Antenna AM loop antennaMain jacks Subwoofer jackRear Center jack Center jackAC Outlets Switched Connecting the AC power cordSTANDBY/ON System Power China and General modelsShort display Full displayDisplay off Full display Short DisplayNrm Normal/-10 dB CenterAMP Press AMP to selectTo output TestEffect speakers using Adjust the levelSo that it matches Level of the mainTo select Main SpeakersTo be used =ii=When you have finished using This unit BGV background video functionTo mute the sound II E Input modeProgram 1 Program name OwHSub-program name Program Selecting PRO LogicPlaying Dolby Digital Surround EX or DTS ES software Matrix indicator lights upVirtual Cinema DSP Silent Cinema DSPProgram Features Recreating a sound fieldDisco Page Dolby Digital EX/DTS-ES compatible + DSP sound field effect Dolby Digital/DTS + DSP sound field effectDolby Pro Logic + DSP sound field effect Dolby Pro Logic ITTable of Program Names for Each Input Format For movie programs No toChannel Channel StereoTheater For audio-video sources No toManual tuning Automatic tuningPress PRESET/TUNING / once to begin automatic tuning Goesoff231 Automatic preset tuning optionsFor FM stations Memory back-up2,5 Manually presetting stationsTune in to a station Press Memory MANL/AUTO FMPress PRESET/TUNING Edit again Press and hold PRESET/TUNING Edit for more than 3 seconds31,3 2,4 Tt c.,, .=M ¢ h1LJTo set Amount of time P P I 7Fir,iFSpecial considerations when Recording DTS software Timer playback/recordingMemory back-up Speaker SET Center Input ModeMain Rear LRLRG 1A Center center speaker ModeSML NON1C Rear LR rear speaker mode 1B Main main speaker mode1D Rear CT rear center speaker mode 1E Bass LFE/bass out modePress to adjust the LFE level 1F Main Lv main level modeSTD MAXPress repeatedly to exit from Input RenameDimmer Blue BackPage Controlling this unit Controlling other componentComponent control area Press Code SET again to exit from the setup Mode Press Code SET using a ballpoint pen or similar objectIi i!!!i liiI Ii iPress RE-NAME again to exit from Renaming mode JiiiiiiJiPress / to move the cursor to the next Position I il ill setup manufacturer code for Component control Press a / v to select the clear modePress and hold Clear again for about 3 seconds Ii ii hiClearsall renamedsourcenamesDVD player AMP ? £ i ir,?Elements of a sound field Early reflectionsReverberations Press To change Example of the parameter setting displayValue Program No. Program name CursorRoom Size for the presence sound field Room SizeINIT. DLY Surround initial delay Liveness Surround livenessLiveness REV.TIME REV. Delay Reverberation delayReverberation Time REV. Level Reverberation levelFor 6ch Stereo DimensionPanorama CtwidthGeneral Problem Poor bass reproductionRemedy Refer Cause ProblemRemedy Refer This unit does not operate properlyProblemCause Remote controlPreviously preset stations can no longer be tuned TunerDTS Digital Theater Systems Cinema DSPSilent Cinema PCM Sampling Frequency and numberVideo Section Audio SectionFM Section AM SectionOyamaha

RX-V730 specifications

The Yamaha RX-V730 is a noteworthy home theater receiver, particularly well-regarded for its blend of performance, features, and versatility. Introduced in the early 2000s, this model serves as a testament to Yamaha’s commitment to crafting high-quality audio components that cater to both casual listeners and audiophiles alike.

At its core, the RX-V730 supports a robust surround sound experience with its 6.1 channel output, allowing users to immerse themselves in multi-dimensional audio. It boasts an impressive power output of up to 100 watts per channel, producing clear and dynamic sound that enriches movies, music, and games. The hallmark of the RX-V730 is its compatibility with various surround sound formats, including Dolby Digital EX and DTS-ES, enabling it to create a captivating acoustic environment that faithfully reproduces the sounds from modern film soundtracks.

One of the RX-V730's significant features is its Digital Signal Processing (DSP) technology. With multiple DSP modes at users' disposal, such as concert hall and jazz club, the receiver enhances audio playback to replicate the acoustics of different environments, creating a customizable listening experience tailored to individual preferences. This technology ensures that soundtracks and audio tracks maintain clarity and power, regardless of the source material.

Connectivity is also a strong suit of the RX-V730. It includes a variety of inputs, such as multiple digital inputs (both optical and coaxial) for connecting to CD players, DVD players, and gaming consoles. It also features an array of analog inputs and outputs, along with a dedicated subwoofer output, providing flexibility for system configuration. Furthermore, the receiver supports video switching capabilities for composite and S-Video inputs, making it a versatile hub for home entertainment systems.

In terms of user interface, the RX-V730 is designed with intuitive on-screen menus, making setup and operation user-friendly. The remote control offers convenient access to various functions, ensuring that users can manage their audio and video setup with ease. The learning function of the remote allows it to control other devices, making it a comprehensive tool for managing an entire home theater system.

The Yamaha RX-V730, with its blend of innovative technologies, high-quality sound reproduction, and user-friendly features, provides an excellent option for those looking to enhance their home audio experience. Whether it’s a movie night, a family gathering, or an immersive gaming session, this receiver delivers the audio performance needed to make any experience memorable.
Top Page Image Contents