Yamaha RX-V730 1B Main main speaker mode, 1C Rear LR rear speaker mode, 1E Bass LFE/bass out mode

Page 47

•1B MAIN (main speaker mode)

Choices: LARGE, SMALL

LARGE

Select this if you have large main speakers. The entire range of the main left and right channel signal is directed to the main left and right speakers.

SMALL

Select this if you have small main speakers. The low-

frequency signals (90 Hz and below) of the main channel are directed to the speakers selected with "IE BASS".

•1C REAR LR (rear speaker mode)

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have large rear left and fight speakers or

if a rear subwoofer is connected to the rear speakers. The entire range of the rear channel signal is directed to the rear left and right speakers.

SML

Select this if you have small rear left and right speakers.

The low-frequency signals (90 Hz and below) of the rear channel are directed to the speakers selected with "IE BASS".

NON

Select this if you do not have rear speakers.

•This unit is set in the virtual CINEMA DSP mode when you select NON for "1C REAR LR". In this case, the rear center speaker will automatically be set to "NON" and the "ID REAR CT" item will be skipped.

•1D REAR CT (rear center speaker mode)

By adding a rear center speaker to your speaker

configuration, this unit can provide more realistic front- to-back and transitions.

Choices: LRG (large), SML (small), NON (none)

LRG

Select this if you have a large rear center speaker. The entire range of the rear center channel signal is directed to the rear center speaker.

SML

Select this if you have a small rear center speaker. The

low-frequency signals (90 Hz and below) of the rear center channel are directed to the speakers selected with "IE BASS".

NON

Select this if you do not have a rear center speaker. All of the rear center channel signal are directed to the rear left and fight speakers.

•1E BASS (LFE/bass out mode)

LFE signals carry low-frequency effects when this unit decodes a Dolby Digital or DTS signal. Low-frequency signals are defined as 90 Hz and below. The Low-

frequency signals can be directed to both main left and

right speakers, and the subwoofer (subwoofer can be used

for both stereo reproduction and the DSP program).

Choices: SWFR (subwoofer), MAIN, BOTH

SWFR

Select this if you use a subwoofer. The LFE signals are directed to the subwoofer.

MAIN

Select this if you do not use a subwoofer. The LFE signals are directed to the main speakers.

BOTH

The LFE signals are directed to the subwoofer. Low-

frequency signals designated to the main channels in

accordance with other speaker mode settings are directed to both main speakers and a subwoofer.

•When you select MAIN for "IE BASS", the low-frequency signals (90 Hz and below) of the main channel are directed to

the main speakers even if you select SMALL for the main speaker mode.

43

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Page Riskof Electricshock Donotopen FCC FOG Information for US customers onlyAnsi NfpaYamaha We Want You Listening For a LifetimeFor Canadian Customers Contents Features Getting Started DIGITAL. EX ProcessingAbout this manual Adapter U.K. model Singapore models A., Canada, ChinaKorea and General models 75-ohm/300-ohm antenna Europe, U.K., AustraliaSTANDBY/ON Remote control sensorInput Mode Front panel displayMemory MANL/AUTO FM PRESET/TUNING EditTuning Mode AUTO/MANL Mono RE-NAME StandbyLevel @ TestI1 on Screen Handling the remote controlSelect A/V SET MenuAuto indicator Volume level indicatorTuned indicator Memory indicatorRear speakers Use of a subwoofer expands your sound fieldMain speakers Center speakerMain Speakers terminals Connecting to the SpeakersSpeaker cables TerminalsMain Speaker Right Left Center Subwoofer Rear center System Subwoofer jackImpedance Selector Impedance Selector switchSwitch Connecting to digital jacks Connecting a VCR or DVR digital Video recorder Connecting a video monitorConnecting a DVD player/digital TV/cable TV Connecting a game console or CamcorderVideo monitor Indicates Signal Direction Left analog Cables Right AnalogRecorder Connecting a CD playerConnecting a CD recorder or MD Connecting a turntableIncluded Indoor FM Antenna AM loop antenna Connecting the AM loop antennaFrequency Step switch China and General Models 75-ohm/300-ohm antenna adapter U.K. modelCenter jack Subwoofer jackMain jacks Rear Center jackChina and General models Connecting the AC power cordAC Outlets Switched STANDBY/ON System PowerFull display Short Display Full displayShort display Display offNrm Normal/-10 dB CenterTest Press AMP to selectAMP To outputLevel of the main Adjust the levelEffect speakers using So that it matches=ii= SpeakersTo select Main To be usedTo mute the sound When you have finished using This unitBGV background video function II E Input modeSub-program name Program 1 Program nameOwH Program Selecting PRO LogicSilent Cinema DSP Matrix indicator lights upPlaying Dolby Digital Surround EX or DTS ES software Virtual Cinema DSPDisco Program FeaturesRecreating a sound field Page Dolby Pro Logic IT Dolby Digital/DTS + DSP sound field effectDolby Digital EX/DTS-ES compatible + DSP sound field effect Dolby Pro Logic + DSP sound field effectChannel Stereo For movie programs No toTable of Program Names for Each Input Format ChannelTheater For audio-video sources No toGoesoff Automatic tuningManual tuning Press PRESET/TUNING / once to begin automatic tuningMemory back-up Automatic preset tuning options231 For FM stationsPress Memory MANL/AUTO FM Manually presetting stations2,5 Tune in to a stationTt c.,, .=M ¢ h1LJ Press and hold PRESET/TUNING Edit for more than 3 secondsPress PRESET/TUNING Edit again 31,3 2,4To set Amount of time P P I 7Fir,iFMemory back-up Special considerations when Recording DTS softwareTimer playback/recording Rear LR Input ModeSpeaker SET Center MainNON 1A Center center speaker ModeLRG SML1E Bass LFE/bass out mode 1B Main main speaker mode1C Rear LR rear speaker mode 1D Rear CT rear center speaker modePress to adjust the LFE level 1F Main Lv main level modeRename MAXSTD Press repeatedly to exit from InputDimmer Blue BackPage Component control area Controlling this unitControlling other component Ii i Press Code SET using a ballpoint pen or similar objectPress Code SET again to exit from the setup Mode Ii i!!!i liiIPress / to move the cursor to the next Position Press RE-NAME again to exit from Renaming modeJiiiiiiJi Ii ii hiClearsall renamedsourcenames Press a / v to select the clear modeI il ill setup manufacturer code for Component control Press and hold Clear again for about 3 secondsDVD player AMP ? £ i ir,?Reverberations Elements of a sound fieldEarly reflections Program No. Program name Cursor Example of the parameter setting displayPress To change ValueRoom Size for the presence sound field Room SizeLiveness INIT. DLY Surround initial delayLiveness Surround liveness REV. Level Reverberation level REV. Delay Reverberation delayREV.TIME Reverberation TimeCtwidth DimensionFor 6ch Stereo PanoramaGeneral Remedy Refer ProblemPoor bass reproduction This unit does not operate properly ProblemCause Remedy ReferTuner Remote controlProblemCause Previously preset stations can no longer be tunedSilent Cinema DTS Digital Theater SystemsCinema DSP PCM Sampling Frequency and numberAM Section Audio SectionVideo Section FM SectionOyamaha

RX-V730 specifications

The Yamaha RX-V730 is a noteworthy home theater receiver, particularly well-regarded for its blend of performance, features, and versatility. Introduced in the early 2000s, this model serves as a testament to Yamaha’s commitment to crafting high-quality audio components that cater to both casual listeners and audiophiles alike.

At its core, the RX-V730 supports a robust surround sound experience with its 6.1 channel output, allowing users to immerse themselves in multi-dimensional audio. It boasts an impressive power output of up to 100 watts per channel, producing clear and dynamic sound that enriches movies, music, and games. The hallmark of the RX-V730 is its compatibility with various surround sound formats, including Dolby Digital EX and DTS-ES, enabling it to create a captivating acoustic environment that faithfully reproduces the sounds from modern film soundtracks.

One of the RX-V730's significant features is its Digital Signal Processing (DSP) technology. With multiple DSP modes at users' disposal, such as concert hall and jazz club, the receiver enhances audio playback to replicate the acoustics of different environments, creating a customizable listening experience tailored to individual preferences. This technology ensures that soundtracks and audio tracks maintain clarity and power, regardless of the source material.

Connectivity is also a strong suit of the RX-V730. It includes a variety of inputs, such as multiple digital inputs (both optical and coaxial) for connecting to CD players, DVD players, and gaming consoles. It also features an array of analog inputs and outputs, along with a dedicated subwoofer output, providing flexibility for system configuration. Furthermore, the receiver supports video switching capabilities for composite and S-Video inputs, making it a versatile hub for home entertainment systems.

In terms of user interface, the RX-V730 is designed with intuitive on-screen menus, making setup and operation user-friendly. The remote control offers convenient access to various functions, ensuring that users can manage their audio and video setup with ease. The learning function of the remote allows it to control other devices, making it a comprehensive tool for managing an entire home theater system.

The Yamaha RX-V730, with its blend of innovative technologies, high-quality sound reproduction, and user-friendly features, provides an excellent option for those looking to enhance their home audio experience. Whether it’s a movie night, a family gathering, or an immersive gaming session, this receiver delivers the audio performance needed to make any experience memorable.
Top Page Image Contents