Yamaha RX-V730 owner manual Press AMP to select, Amp, To output, Test tone

Page 26

This section explains how to adjust speaker output levels

using the test tone generator. When this adjustment is

complete, the output level heard at the listening position should be the same from each speaker. This is important

for best performance of the digital sound field processor, and the various decoders (Dolby Digital, Dolby Pro Logic, Dolby Pro Logic lI and DTS).

•Since this unit cannot enter the test mode while headphones are

connected to this unit, be sure to unplug the headphones from the PHONES jack when using the test tone.

 

2

 

 

 

3

 

[] Turn

on

the

video

monitor

connected

to this

unit.

 

 

 

 

 

 

Press

SPEAKERS

A or B

SPEAKERS

to select

the

main

 

_>

Q--,

speakers

to

be used.

 

",!:;

If you are using two sets of the

main speakers, press both A and B.

[] Set the BASS and TREBLE controls on the

front panel to the center position.

BASSTREBLE

®Q

Use the test tone to balance the output levels of the

speakers. The adjustment of each speaker output level should be made at your listening position using the remote control.

3

[]

Press AMP to select the

AMP

 

AMP mode.

 

 

 

 

"AMP" appears in the display

 

 

window on the remote control.

 

[]

Press TEST

to output

the

TEST

 

test tone.

 

 

 

[]

Adjust the

volume of

this unit

so you can

hear the test tone.

The test tone is heard (in order) from the main left speaker, center speaker, main fight speaker, rear fight speaker, rear center, rear left speaker, and the subwoofer. The tone is produced for 2.5 seconds from each speaker.

VOLUMEor

Front panel

Remote control

22

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Page Riskof Electricshock Donotopen Nfpa FOG Information for US customers onlyAnsi FCCYamaha We Want You Listening For a LifetimeFor Canadian Customers Contents Features Getting Started DIGITAL. EX ProcessingAbout this manual 75-ohm/300-ohm antenna Europe, U.K., Australia A., Canada, ChinaKorea and General models Adapter U.K. model Singapore modelsFront panel display Remote control sensorInput Mode STANDBY/ONMemory MANL/AUTO FM PRESET/TUNING EditTuning Mode AUTO/MANL Mono @ Test StandbyLevel RE-NAMESET Menu Handling the remote controlSelect A/V I1 on ScreenMemory indicator Volume level indicatorTuned indicator Auto indicatorCenter speaker Use of a subwoofer expands your sound fieldMain speakers Rear speakersTerminals Connecting to the SpeakersSpeaker cables Main Speakers terminalsSubwoofer jack Main Speaker Right Left Center Subwoofer Rear center SystemImpedance Selector Impedance Selector switchSwitch Connecting to digital jacks Connecting a game console or Camcorder Connecting a video monitorConnecting a DVD player/digital TV/cable TV Connecting a VCR or DVR digital Video recorderIndicates Signal Direction Left analog Cables Right Analog Video monitorConnecting a turntable Connecting a CD playerConnecting a CD recorder or MD Recorder75-ohm/300-ohm antenna adapter U.K. model Connecting the AM loop antennaFrequency Step switch China and General Models Included Indoor FM Antenna AM loop antennaRear Center jack Subwoofer jackMain jacks Center jackSTANDBY/ON System Power Connecting the AC power cordAC Outlets Switched China and General modelsDisplay off Full displayShort display Full display Short DisplayCenter Nrm Normal/-10 dBTo output Press AMP to selectAMP TestSo that it matches Adjust the levelEffect speakers using Level of the mainTo be used SpeakersTo select Main =ii=To mute the sound When you have finished using This unitBGV background video function Input mode II ESub-program name Program 1 Program nameOwH Selecting PRO Logic ProgramVirtual Cinema DSP Matrix indicator lights upPlaying Dolby Digital Surround EX or DTS ES software Silent Cinema DSPDisco Program FeaturesRecreating a sound field Page Dolby Pro Logic + DSP sound field effect Dolby Digital/DTS + DSP sound field effectDolby Digital EX/DTS-ES compatible + DSP sound field effect Dolby Pro Logic ITChannel For movie programs No toTable of Program Names for Each Input Format Channel StereoFor audio-video sources No to TheaterPress PRESET/TUNING / once to begin automatic tuning Automatic tuningManual tuning GoesoffFor FM stations Automatic preset tuning options231 Memory back-upTune in to a station Manually presetting stations2,5 Press Memory MANL/AUTO FM31,3 2,4 Press and hold PRESET/TUNING Edit for more than 3 secondsPress PRESET/TUNING Edit again Tt c.,, .=M ¢ h1LJP P I 7Fir,iF To set Amount of timeMemory back-up Special considerations when Recording DTS softwareTimer playback/recording Main Input ModeSpeaker SET Center Rear LRSML 1A Center center speaker ModeLRG NON1D Rear CT rear center speaker mode 1B Main main speaker mode1C Rear LR rear speaker mode 1E Bass LFE/bass out mode1F Main Lv main level mode Press to adjust the LFE levelPress repeatedly to exit from Input MAXSTD RenameBlue Back DimmerPage Component control area Controlling this unitControlling other component Ii i!!!i liiI Press Code SET using a ballpoint pen or similar objectPress Code SET again to exit from the setup Mode Ii iPress / to move the cursor to the next Position Press RE-NAME again to exit from Renaming modeJiiiiiiJi Press and hold Clear again for about 3 seconds Press a / v to select the clear modeI il ill setup manufacturer code for Component control Ii ii hiClearsall renamedsourcenamesDVD player ? £ i ir,? AMPReverberations Elements of a sound fieldEarly reflections Value Example of the parameter setting displayPress To change Program No. Program name CursorRoom Size Room Size for the presence sound fieldLiveness INIT. DLY Surround initial delayLiveness Surround liveness Reverberation Time REV. Delay Reverberation delayREV.TIME REV. Level Reverberation levelPanorama DimensionFor 6ch Stereo CtwidthGeneral Remedy Refer ProblemPoor bass reproduction Remedy Refer ProblemCause This unit does not operate properlyPreviously preset stations can no longer be tuned Remote controlProblemCause TunerSilent Cinema DTS Digital Theater SystemsCinema DSP Sampling Frequency and number PCMFM Section Audio SectionVideo Section AM SectionOyamaha

RX-V730 specifications

The Yamaha RX-V730 is a noteworthy home theater receiver, particularly well-regarded for its blend of performance, features, and versatility. Introduced in the early 2000s, this model serves as a testament to Yamaha’s commitment to crafting high-quality audio components that cater to both casual listeners and audiophiles alike.

At its core, the RX-V730 supports a robust surround sound experience with its 6.1 channel output, allowing users to immerse themselves in multi-dimensional audio. It boasts an impressive power output of up to 100 watts per channel, producing clear and dynamic sound that enriches movies, music, and games. The hallmark of the RX-V730 is its compatibility with various surround sound formats, including Dolby Digital EX and DTS-ES, enabling it to create a captivating acoustic environment that faithfully reproduces the sounds from modern film soundtracks.

One of the RX-V730's significant features is its Digital Signal Processing (DSP) technology. With multiple DSP modes at users' disposal, such as concert hall and jazz club, the receiver enhances audio playback to replicate the acoustics of different environments, creating a customizable listening experience tailored to individual preferences. This technology ensures that soundtracks and audio tracks maintain clarity and power, regardless of the source material.

Connectivity is also a strong suit of the RX-V730. It includes a variety of inputs, such as multiple digital inputs (both optical and coaxial) for connecting to CD players, DVD players, and gaming consoles. It also features an array of analog inputs and outputs, along with a dedicated subwoofer output, providing flexibility for system configuration. Furthermore, the receiver supports video switching capabilities for composite and S-Video inputs, making it a versatile hub for home entertainment systems.

In terms of user interface, the RX-V730 is designed with intuitive on-screen menus, making setup and operation user-friendly. The remote control offers convenient access to various functions, ensuring that users can manage their audio and video setup with ease. The learning function of the remote allows it to control other devices, making it a comprehensive tool for managing an entire home theater system.

The Yamaha RX-V730, with its blend of innovative technologies, high-quality sound reproduction, and user-friendly features, provides an excellent option for those looking to enhance their home audio experience. Whether it’s a movie night, a family gathering, or an immersive gaming session, this receiver delivers the audio performance needed to make any experience memorable.
Top Page Image Contents