Yamaha RX-V730 owner manual Short display, Display off, Full display Short Display

Page 24

You can display operational information for this unit on a

video monitor. If you display the SET MENU and DSP

program parameter settings on a monitor, it is much easier

to see the available options and parameters than it is by

reading this information on the front panel display.

•If a video source is playing, the OSD is superimposed over the video image.

•The OSD signal is not output to the OUT (REC) jack, and will

not be recorded with any video signal.

•You can set the OSD to turn on (blue background) or off when

there is no video signal by using "10 DISPLAY SET" on the SET MENU (see page 46).

You can select the amount of information the shown in

the on-screen display.

Full display

This mode shows the DSP program parameter settings

continuously on the video monitor.

Short display

This mode briefly shows the front panel display message

at the bottom of the screen and then disappears.

Display off

This mode briefly shows "DISPLAY OFF" at the bottom

of the screen and then disappears. In this mode, no

operational information will be shown on the monitor,

except when ON SCREEN is _ressed.

PEIICONCERTHALL

IHiT,

C,LY ....

45r,_s

 

ROOM

SiZE ....

 

!,0

 

LiUENESS

.......

 

5

 

 

 

 

F'O1 20iiCERT

HgtLL

Full display

Short

display

•When you choose the full display mode, INPUT <3 / [:>,

VOLUME and some other types of operational information are

displayed at the bottom of the screen in the same format as the front panel display.

•The SET MENU and test tone display appear regardless of the OSD mode.

[] Turn on the video monitor connected to this

unit.

P_ Press AMP.

[] Press ON SCREEN on the remote control

repeatedly to change the display mode.

The OSD mode changes in the following order:

full display, short display, and display off.

•If your video monitor is connected only to the COMPONENT VIDEO jacks of this unit, the OSD is not shown. Make sure to

connect your video monitor to the COMPONENT VIDEO jacks and either VIDEO or S VIDEO jacks if you want to see the OSD.

•Playing back video software that has an anti-copy signal or

video signals with a lot of noise may produce unstable images.

(When using two video monitors)

•If you select video source from a component connected to both

the S VIDEO IN and composite VIDEO IN jacks, and both S

VIDEO OUT and composite VIDEO OUT jacks are connected

to two different monitors, the OSD appears only the monitor

connected with S-video jacks. When there is no video signal

input from source component, the OSD appears on both monitors.

2O

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Page Riskof Electricshock Donotopen FOG Information for US customers only AnsiNfpa FCCWe Want You Listening For a Lifetime For Canadian CustomersYamaha Contents Features Getting Started Processing About this manualDIGITAL. EX A., Canada, China Korea and General models75-ohm/300-ohm antenna Europe, U.K., Australia Adapter U.K. model Singapore modelsRemote control sensor Input ModeFront panel display STANDBY/ONPRESET/TUNING Edit Tuning Mode AUTO/MANL MonoMemory MANL/AUTO FM Standby Level@ Test RE-NAMEHandling the remote control Select A/VSET Menu I1 on ScreenVolume level indicator Tuned indicatorMemory indicator Auto indicatorUse of a subwoofer expands your sound field Main speakersCenter speaker Rear speakersConnecting to the Speakers Speaker cablesTerminals Main Speakers terminalsSubwoofer jack Main Speaker Right Left Center Subwoofer Rear center SystemImpedance Selector switch SwitchImpedance Selector Connecting to digital jacks Connecting a video monitor Connecting a DVD player/digital TV/cable TVConnecting a game console or Camcorder Connecting a VCR or DVR digital Video recorderIndicates Signal Direction Left analog Cables Right Analog Video monitorConnecting a CD player Connecting a CD recorder or MDConnecting a turntable RecorderConnecting the AM loop antenna Frequency Step switch China and General Models75-ohm/300-ohm antenna adapter U.K. model Included Indoor FM Antenna AM loop antennaSubwoofer jack Main jacksRear Center jack Center jackConnecting the AC power cord AC Outlets SwitchedSTANDBY/ON System Power China and General modelsFull display Short displayDisplay off Full display Short DisplayCenter Nrm Normal/-10 dBPress AMP to select AMPTo output TestAdjust the level Effect speakers usingSo that it matches Level of the mainSpeakers To select MainTo be used =ii=When you have finished using This unit BGV background video functionTo mute the sound Input mode II EProgram 1 Program name OwHSub-program name Selecting PRO Logic ProgramMatrix indicator lights up Playing Dolby Digital Surround EX or DTS ES softwareVirtual Cinema DSP Silent Cinema DSPProgram Features Recreating a sound fieldDisco Page Dolby Digital/DTS + DSP sound field effect Dolby Digital EX/DTS-ES compatible + DSP sound field effectDolby Pro Logic + DSP sound field effect Dolby Pro Logic ITFor movie programs No to Table of Program Names for Each Input FormatChannel Channel StereoFor audio-video sources No to TheaterAutomatic tuning Manual tuningPress PRESET/TUNING / once to begin automatic tuning GoesoffAutomatic preset tuning options 231For FM stations Memory back-upManually presetting stations 2,5Tune in to a station Press Memory MANL/AUTO FMPress and hold PRESET/TUNING Edit for more than 3 seconds Press PRESET/TUNING Edit again31,3 2,4 Tt c.,, .=M ¢ h1LJP P I 7Fir,iF To set Amount of timeSpecial considerations when Recording DTS software Timer playback/recordingMemory back-up Input Mode Speaker SET CenterMain Rear LR1A Center center speaker Mode LRGSML NON1B Main main speaker mode 1C Rear LR rear speaker mode1D Rear CT rear center speaker mode 1E Bass LFE/bass out mode1F Main Lv main level mode Press to adjust the LFE levelMAX STDPress repeatedly to exit from Input RenameBlue Back DimmerPage Controlling this unit Controlling other componentComponent control area Press Code SET using a ballpoint pen or similar object Press Code SET again to exit from the setup ModeIi i!!!i liiI Ii iPress RE-NAME again to exit from Renaming mode JiiiiiiJiPress / to move the cursor to the next Position Press a / v to select the clear mode I il ill setup manufacturer code for Component controlPress and hold Clear again for about 3 seconds Ii ii hiClearsall renamedsourcenamesDVD player ? £ i ir,? AMPElements of a sound field Early reflectionsReverberations Example of the parameter setting display Press To changeValue Program No. Program name CursorRoom Size Room Size for the presence sound fieldINIT. DLY Surround initial delay Liveness Surround livenessLiveness REV. Delay Reverberation delay REV.TIMEReverberation Time REV. Level Reverberation levelDimension For 6ch StereoPanorama CtwidthGeneral Problem Poor bass reproductionRemedy Refer Problem CauseRemedy Refer This unit does not operate properlyRemote control ProblemCausePreviously preset stations can no longer be tuned TunerDTS Digital Theater Systems Cinema DSPSilent Cinema Sampling Frequency and number PCMAudio Section Video SectionFM Section AM SectionOyamaha

RX-V730 specifications

The Yamaha RX-V730 is a noteworthy home theater receiver, particularly well-regarded for its blend of performance, features, and versatility. Introduced in the early 2000s, this model serves as a testament to Yamaha’s commitment to crafting high-quality audio components that cater to both casual listeners and audiophiles alike.

At its core, the RX-V730 supports a robust surround sound experience with its 6.1 channel output, allowing users to immerse themselves in multi-dimensional audio. It boasts an impressive power output of up to 100 watts per channel, producing clear and dynamic sound that enriches movies, music, and games. The hallmark of the RX-V730 is its compatibility with various surround sound formats, including Dolby Digital EX and DTS-ES, enabling it to create a captivating acoustic environment that faithfully reproduces the sounds from modern film soundtracks.

One of the RX-V730's significant features is its Digital Signal Processing (DSP) technology. With multiple DSP modes at users' disposal, such as concert hall and jazz club, the receiver enhances audio playback to replicate the acoustics of different environments, creating a customizable listening experience tailored to individual preferences. This technology ensures that soundtracks and audio tracks maintain clarity and power, regardless of the source material.

Connectivity is also a strong suit of the RX-V730. It includes a variety of inputs, such as multiple digital inputs (both optical and coaxial) for connecting to CD players, DVD players, and gaming consoles. It also features an array of analog inputs and outputs, along with a dedicated subwoofer output, providing flexibility for system configuration. Furthermore, the receiver supports video switching capabilities for composite and S-Video inputs, making it a versatile hub for home entertainment systems.

In terms of user interface, the RX-V730 is designed with intuitive on-screen menus, making setup and operation user-friendly. The remote control offers convenient access to various functions, ensuring that users can manage their audio and video setup with ease. The learning function of the remote allows it to control other devices, making it a comprehensive tool for managing an entire home theater system.

The Yamaha RX-V730, with its blend of innovative technologies, high-quality sound reproduction, and user-friendly features, provides an excellent option for those looking to enhance their home audio experience. Whether it’s a movie night, a family gathering, or an immersive gaming session, this receiver delivers the audio performance needed to make any experience memorable.
Top Page Image Contents