TP-Link TL-SC323ON, TL-SC3230N manual Object detection Set up Object detection

¾SMTP Server: Type the SMTP server name or the IP address of the SMTP server.

¾Test: Send a test mail to mail server to check this account is available or not.

¾SMTP Port: Set port number of SMTP service.

¾SSL: Enable SSL function or not.

¾SMTP Authentication: Select the authentication required when you send an e-mail. Disable:

if no authentication is required when an e-mail is sent. Enable: if authentication is required when an e-mail is sent.

¾Authentication User name: Type the user name for the SMTP server if Authentication is enabled.

¾Authentication Password: Type the password for the SMTP server if Authentication is enabled.

¾E-mail From: Type the sender’s E-mail address. This address is used for reply e-mails.

¾E-mail To: Type the receiver’s e-mail address.

¾E-mail Subject: Type the subject/title of the e-mail.

6.8 Object detection: Set up Object detection

Use this menu to specify motion detection window 1 to window 10 and set the conditions for detection while observing a captured image.

47