Yamaha CDX-97, CDX-397 owner manual 11 En, Changing brightness of the display, Automatic spacing

Page 13

Changing brightness of the display

English

You can change brightness of the display in three degrees by pressing DIMMER.

Normal illumination

DIMMER

Slightly dim

Dim

Automatic spacing

If you record a disc onto tape with an insufficient time space between tracks, the tape deck will not be able to perform blank search operations on the tape correctly. To enable a track search operation, use this function to add an interval of about 4 seconds between tracks.

Press SPACE to light up the current setting.

SPACE

Light up about 3 seconds.

While the current setting is lit up, press SPACE to change the setting between "AUTO SPACE ON" and "AUTO SPACE OFF".

Notes

When the automatic spacing function is in effect, the display of the total time and of the total remaining time includes each interval of the 4 seconds between tracks.

When the automatic spacing function is in effect during the playback, "AUTO SPC 4" (the remaining seconds of the interval) appears and is counted down each time blinking at the interval between the tracks.

Adjusting the output level (CDX-497 only)

You can adjust the level of signals output to the amplifier by pressing OUTPUT LEVEL +/–.

When you listen with headphones, connect the headphones to the PHONES jack.

OUTPUT

LEVEL

11 En

Image 13
Contents CDX-497/397 Special Instructions for U.K. Model For U.K. customersContents Supported Disc Types FeaturesRemote control operation range Battery installationBattery replacement UnpackingWhen the Digital OUT Optical terminal of this unit is used When the Line OUT analog terminals of this unit are usedConnections CDX-497 onlyFront panel Identification of ComponentsDisplay Stop pIndex p Remote controlShaded parts are provided for CDX-497 only Press OPEN/CLOSE to close the disc tray Basic OperationPress to start playback Disc trayTo pause playback To turn off the powerTo stop playback To search an folder/file on an MP3 or WMA disc CDX-497 onlyTo advance or reverse playback rapidly Manual search To skip to the beginning of the desired track Skip searchChanging display 10 En11 En Adjusting the output level CDX-497 onlyChanging brightness of the display Automatic spacingRepeat Play RANDOM-SEQUENCE Play12 En Repeat a selected item13 En To cancel the repeat A-BRepeat A-B Press A-Bto select the start point of repeat play14 En Program PlayDisplay information in step Press to start program play15 En Index Search16 En Track Programming for Recording to TapeAutomatic tape-programming for Audio CD Press to stop the playback17 En 18 En When track selection for side a is finished, pressManual tape-programming for Audio CD Follow steps 1 3 on Press Program BlinksRandom sequential tape-programming for Audio CD 19 EnFollow steps 1 3 on Press Random 20 En To cancel the peak level search functionCD Synchronized Recording To cancel synchronized CD-tape recording function21 En Discs playable with this unit 22 En23 En Troubleshooting24 En SpecificationsAudio Section Laser Diode PropertiesPage Example CDX-497 Achtung