Notes
●In step 4, you can check the program data for side A and side B
after pressing REPEAT. Information for each side is displayed
for 3 seconds. 1 | 2 | 3 | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PROG. |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Shows the number of programmed tracks.
2 Shows the total time of programmed tracks.
3 Shows the side of the tape.
●All tracks may not be programmed if the tape length is not enough. To program all tracks, use a tape that is longer than the actual playing time.
●You can check, cancel or correct program data. (For details, refer to page 15.)
* When checking program data, note that “Pu” appears between track numbers for side A and side B.
●Up to 40 tracks can be programmed. A pause inserted between side A and B is counted as one track.
●CD synchronized recording function can be used if your tape deck is compatible with this unit. If so, in step 5 and 6, press
SYNCHRO and then press 
on the remote control of this unit. Recording automatically starts. (For details, refer to page 21.)