Track Programming for Recording to Tape, 16 En

TRACK PROGRAMMING FOR RECORDING TO TAPE

The unit can program tracks on a disc for recording onto tape. By considering the total possible recording time of the tape, the unit automatically programs tracks or help you program tracks so they fits onto the tape with the least amount of unrecorded space at each end of the tape.

Automatic tape-programming (for Audio CD)

The unit automatically programs tracks on a disc with their original order.

1 2 3 4

3	5	6	7	8
	9	0		INDEX
	DIMMER		RANDOM
	REPEAT	A–B	PROGRAM	CLEAR
3	SYNCHRO	TAPE	PEAK	SPACE	2
3					2

1 Press to stop the playback.

*The peak level search function of this unit is useful for adjusting recording level on the tape deck. (For details, refer to page 20.)

2 If desired, you can automatically insert additional time space between tracks. (For details, refer to page 11.)

SPACE

AUTO SPC ON

3 Press TAPE to show the total possible recording time of the tape on the display.

TAPE

“TAPE46” appears.

You can select any of the four tape lengths by pressing TAPE.

	46
(off)	54
90	60

DIMMERRANDOM

REPEAT A–B PROGRAM CLEAR

4 SYNCHRO TAPE PEAK SPACE

5, 6 1

TIME/INFO	6
FOLDER

If desired, you can also enter the total possible recording time of the tape manually.

Example: For a C-64 tape (32 minutes on each side), press “6” and “4”.

4 Press REPEAT.

REPEAT

The unit automatically programs tracks for both side A and side B considering the total time of the tape.

5 Start recording on the tape deck, and then press on the remote control of this unit.

6 This unit automatically pauses at the end of the side A. Turn the tape over to the side B, resume

recording on the tape deck, and then press or on the remote control of this unit to start

playback.