UNPACKING
Carefully remove this unit and accessories from the box. You should find the unit itself and the following accessories.
English
Remote control
(CDX-497) (CDX-397)
| OPEN/CLOSE |
|
| OPEN/CLOSE |
| ||
1 | 2 | 3 | 4 | 1 | 2 | 3 | 4 |
5 | 6 | 7 | 8 | 5 | 6 | 7 | 8 |
9 | 0 |
| INDEX | 9 | 0 |
| INDEX |
DIMMER |
| RANDOM |
| DIMMER |
| RANDOM |
|
REPEAT | PROGRAM | CLEAR | REPEAT | PROGRAM | CLEAR | ||
SYNCHRO | TAPE | PEAK | SPACE | SYNCHRO | TAPE | PEAK | SPACE |
| SEARCH |
|
| SEARCH |
| ||
TIME/INFO |
|
|
| TIME/INFO |
|
|
|
| FOLDER |
|
|
|
|
|
|
FILE | ENTER | FILE |
|
|
|
|
|
|
|
| OUTPUT |
|
|
|
|
|
|
| LEVEL |
|
|
|
|
Audio pin cable
Batteries (AAA, R03,
FOLDER
NOTES ABOUT THE REMOTE CONTROL
Battery installation
1.Turn the remote control over and remove the battery compartment cover by sliding it in the direction of the arrow.
2.Insert the batteries (AAA, R03,
3.Close the battery compartment cover.
Press %
Remote control operation range
Remote control |
sensor |
Within approximately 6 m
30° | ° | |
30 | ||
|
Battery replacement
If you notice that the remote control must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones.
Notes
●Use only AAA, R03,
●Be sure the polarities are correct. (See the illustration inside the battery compartment.)
●Remove the batteries if the remote control is not used for an extended period of time.
●If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
Notes
●There should be no large obstacles between the remote control and the main unit.
●If the remote control sensor is directly illuminated by strong lighting (especially an inverter type fluorescent lamp etc.), the remote control might not work properly. In this case, reposition the main unit to avoid direct lighting.
3 En