Automatic searching for the peak level on a disc (for Audio CD)
This unit automatically searches for the peak level of the disc, and play back the part repeatedly. When recording to tape, this feature is very helpful for adjusting the recording level on the tape deck.
1 Press 
to stop the playback.
2 Press PEAK.
PEAK
“PK” lights up on the display, and the peak level search is performed on the disc.
It takes a few minutes to search for the peak level.
CD
After searching, this unit plays back the part around the peak level for about 4 seconds repeatedly. According to the peak level, adjust the recording level on your tape deck. (For details, refer to the owner's manual of the tape deck.)
To cancel the peak level search function
Press 
.
Note
Even if the peak level search is performed several times on the same disc, the same part may not be always selected. That is because the unit searches for the peak level among parts of the disc that are randomly selected by the internal microcomputer.
CD