Honeywell HCC-745NTW/PTW Fig5-1. OSD Information Display, Operating OSD description

5. On Screen Display

②, ③ ②, ③

⑤ ④ ⑥

	②, ③
①

<Fig5-1. OSD Information Display>

5.1Understanding the On-Screen Display

a.Press MENU briefly to confirm the current operation setup. The information (see Fig 5-1) will disappear after five seconds if there is no button action.

b.When it zoom in or out pressing UP or DOWN key,

whole OSD Information will appear and then disappear. Press (+) , (-) button, only upper part of OSD Information

( for displaying camera mode ) will appear and then disappear. (It is for checking current whole camera mode and zoom position )

c. Even though the OSD message disappears the Camera ID

or Title will continue to display. If you do not wish to display the ID, you can change the display position. (see 5.11)

Options are: Bottom Right, Top Left, Top Right, Non display.

* If you do not need to display the Operating OSD (for example, for an external text overlay board), it can be set to OFF at all times through a remote control using RS232C or RS485 connection.

	FUNCTION	OSD Format	DESCRIPTION
①	ZOOM	Dx2.5 >>TELE	Zoom TELE
	DISPLAY
		Dx1.0 << WIDE	Zoom WIDE
②	CAMERA ID	None display	ID : 0
		ID : 002	ID : 1 ~ 255
③	TITLE	■■…■■	See 5.11
④	Back Light	Non display	Back Light OFF
		BL	Back Light ON
⑤	Shutter	1/60 (1/50)	NTSC:1/60, PAL :1/50
	Speed
		FL	NTSC:1/120, PAL:1/100
		1/250	1/250
		1/500	1/500
		1/1000	1/1000
		1/2000	1/2000
		1/4000	1/4000
		1/10000	1/10000
		1/20000	1/20000
		1/50000	1/50000
⑥	WB MODE	ATW	Auto Trace White Balance
		AWC	One Push mode
		IN	Indoor Preset (3200°K)
		FRS	Fluorescent (4200°K)
		USR	User mode
		OUT	Outdoor preset (5400°K)
		MWB	Manual mode

<Table5-1. Operating OSD description>

- 11 -