<< SPECIAL FUNCTION >>
① MIRROR | OFF |
② SHARPNESS | 10 |
③ NEGATIVE | OFF |
④ FREEZE | OFF |
⑤ BAUDRATE | 9600bps |
⑥ PROTOCOL | DEFAULT |
⑦ F.OSD DISP | ALL |
RETURN |
|
<Fig5-12. SPECIAL FUNCTION >
5.12SPECIAL FUNCTION ① Mirror Mode
:Mode ON is Mirror Mode, OFF is general screen state.
MIRROR OFF → H MIRROR → V MIRROR → FLIP . . . .
②Sharpness
: Use to change the contour of Scene.
SHARPNESS | 0 ~ 15 |
③Negative Mode
:Use for Positive and Negative mode. ON is Negative mode, OFF is Positive mode namely general screen state.
NEGATIVE | OFF → ON → …. |
④Freeze Mode
:It pause current image. ON is to stop, OFF is to return to normal state.
FREEZE
☞caution
1.Freeze image is not saved after Power OFF / ON . That’s why it doesn’t have memory for saving.
⑤BAUD RATE
:Use to communicate through RS232C, RS485, RS232TTL .
BAUDRATE | 4800bps → 9600bps → …. → 312kbps |
☞caution
1.When Baud Rate of Camera and external system is not same, it happens Communication fail.
⑥PROTOCOL
: Use to communicate through RS232C, RS485.
PROTOCOL | DEFAULT → VCL → KD6 → P/D → .... |
⑦Function OSD Display
OSD DISP | ALL → NONE → TOP → BOTTOM → .... |
ALL | : Whole Function OSD display |
| ( Focus Mode, Key state, Zoom Ratio, ID ) |
TOP | : Only Upper OSD display ( Focus Mode, key state ) |
BOTTOM : Only Lower OSD display ( Zoom Ratio, ID )
NONE : Whoe Function OSD display not.
5.13FACTORY DEFAULT
:All changed data are returned to shipping condition.
For Initialization, select “RESTORE FACTORY SETTING” and push MENU key.
☞caution
1.Keep in mind that this mode return all changed data to shipping condition.
2.Some menu as ID,TITLE, etc are not initialized.
<<RESTORE DEFAULT >>
①RESTORE FACTORY SETTING RETURN
<Fig5-13. RESTORE DEFAULT>
5.14EXIT MENU ① SAVE AND EXIT
: Exit OSD MENU with saving all changed data.
②EXIT
:Exit OSD MENU withoout saving all changed data.
<<EXIT MENU >>
①SAVE AND EXIT
② EXIT
RETURN
- 18 -