Honeywell HZC-855NX, HZC-855PX Fig5-2. Setup Menu change, Display Setup Menu, Setup menu2

Page 12

5.2Display SETUP MENU

a.Press MENU key above 2 seconds so that SETUP MENU 1 is displayed on the screen.

b.Select item of SETUP MENU using TELE(up) / WIDE(down) key.

c.NEAR(+) / FAR(-) key is used to increase / decrease data of selected item.

<<SETUP MENU >> LENS MODE

AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE

PZM SETTING

CAMERA ID SETTINGSetup menu1

SPECIAL FUNCTION

FACTORY DEFAULT

<< LENS MODE >>

 

ZOOM SPEED

10

 

 

START ZOOM

x1

 

END ZOOM

x90

Setup menu2

E-ZOOM

ON

AF MODE

ONESHOT

 

O.RESET

OFF

 

O.AF TIME

5 sec.

 

AF SENS.

HIGH

 

MIN. DIST.

50cm

 

RETURN

 

 

 

<Fig5-2. SETUP MENU change>

5.3Move between SETUP MENU 1 and SETUP MENU 2

a.In order to change from SETUP MENU1 to SETUP MENU 2, select NEXT MENU using TELE / WIDE key, and press NEAR / FAR key.

b.In order to change from SETUP MENU 2 to SETUP MENU1 , select RETURN MENU using TELE / WIDE key, and press NEAR / FAR key.

5.4Quit SETUP MENU

a.Press the MENU key again. SETUP MENU is disappeared, “SAVE?” or “QUIT?” is displayed at center of screen.

If there is no change of adjustment state of Camera, “QUIT?” is showed, else “ SAVE?” is showed.

“QUIT?” : quit SETUP MENU without saving changed value.

“SAVE?” : quit SETUP MENU with saving changed value.

b.Press NEAR / FAR key to choose, and press the MENU key again. whole SETUP MENU is quitted.

( If MENU key is not pressed and TELE / WIDE key is pressed, SETUP MENU is appeared again. )

<< LENS MODE >>

ZOOM SPEED

10

START ZOOM

x1

END ZOOM

x35

E-ZOOM

OFF

AF MODE

ONESHOT

O.RESET

OFF

O.AF TIME

5 sec.

AF SENS.

HIGH

MIN. DIST.

50cm

RETURN

 

5.5LENS MODE

ZOOM Speed Control

: Set zoom speed 1 to 10, 10 steps.

ZOOM SPEED 1 2 10

Start Zoom Ratio

:Set boundary value of WIDE zooming.

START ZOOM

x 1 ~ x 34 ( in optical zoom region )

End Zoom ratio

:Set boundary value of TELE zooming. It can be set up to x90 including electronic zoom. ( in case the digital zoom limit is 2.5 times ) Since Start Zoom and End Zoom ratio are set,

simultaneously Camera moves to setting zoom times. So it can be enable to adjust in moving to desired position.

END ZOOM

x 35 ~ x 90 ( in digital zoom region )

- 12 -

Image 12
Contents HZC-855NX/PX Series Page Water and Moisture Contents Features Ideal Digital Video Camera for SecurityThis is the output terminal for composite video signal This is the output terminal for separate Y/C signalPower on state , this LED is on Terms & FunctionsInstallation Camera Control Methods RDTxD TDRxD TRxD+On Screen Display Fig5-1. Operating OSD display positionOperating OSD description 125OSD Setup Menu Structure Fig5-2. Setup Menu change Display Setup MenuSetup menu2 Fig5-3. Lens Mode Fig5-4. Minimum Focus Distance ModeFig5-5. AE Mode Fig5-6. Brightness in AE ModeFig5-7. WB Mode Fig5-8. Nightshot Mode Fig5-9. BLC/BMB ModeOFF → BLC → H.BLC → WDR → … 10 0 ~Zone 1 → Zone 2 → …. → Zone OFF → on → …Camera ID DisplayPosition BOT → L.TOP → R.TOP → None Special Function Mirror → FlipOn → OFF → … Default → VCL → KD6 → P/D → … 4800bps → 9600bps → …→ 312kbps ALL → None → TOP →Specification OFFDimensions Memo