③RED GAIN (Range is different on each Mode.)
:Adjust RED Gain, and tune the sensitivity of white point.
MANUAL | 0 → 1 → …. → 254 → 255 |
④BLUE GAIN (Range is different on each Mode.)
: Adjust BLUE Gain, and tune the sensitivity of white point.
MANUAL | 0 → 1 → …. → 254 → 255 |
<<SETUP MENU >> LENS MODE
AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT
5.8NIGHTSHOT MODE
①NIGHTSHOT MODE
:It is used in low illumination condition. ON is Night mode, OFF is normal state. Sensitivity of camera becomes more higher level like BW camera.
It can be available external IR illuminator. In case of AUTO mode is converted ON / OFF automatically according to illuminance change.
MODE | OFF → AUTO → ON → …. |
②NIGHTSHOT MODE DETECT TIME
:Set time to protect susceptible conversion of ON/OFF according to illuminance change on Auto. When illuminace keeps the state during
detect time, convert ON/OFF.
DETECT TIME | 1 sec. → 2 sec. → …. → 10 sec. |
③NIGHTSHOT DETECT MODE
:It is good to use with external IR illuminator on Auto. Select CDS
sensor ON/OFF to detect the illuminance state more effectively.
DETECT MODE | BRT → CDS → BRT+CDS → …. |
☞caution
BRT means shooting scene brightness, CDS sensor’s operation depends on circumstantial brightness. Select to match with installation circumstance.
④Turnover LEVEL from DAY TO NIGHT
:Set the LEVEL to turnover from Day to Night.
D→N LEVEL | 0.1 lx → 1 lx → 10 lx → …. |
⑤Turnover LEVEL from NIGHT TO DAY
: Set the LEVEL to turnover from Night to Day.
N→D LEVEL | 10 lx → 100 lx → 1000 lx → …. |
⑥Color on Nightshot Mode
:Set Color Mode on Night Mode.
NIGHT COLOR | B/W → COLOR → …. |
<<NIGHTSHOT MODE >>
MODEAUTO
DETECT TIME | 5sec |
DETECT MODE | BRT |
1lx | |
100lx | |
NIGHT COLOR | B/W |
RETURN |
|
<Fig5-8. NIGHTSHOT MODE >
<<SETUP MENU >> LENS MODE
AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT
<Fig5-9. BLC/BMB Mode >
- 16 -