Elation Professional 575B manual User Mode

Design Spot 575B™

be entered each time the calibration menu function is entered.

9.7 USER MODE:

9.7.1User mode – This function allows the user to create user defined channel orders allowing the fixture to match the channel order of other fixtures on the market for easier operation. A total of three user modes may be configured: User Mode A, User Mode B, and User Mode C.

9.7.2Edit User mode – This function allows the user to make the actual changes in the user-defined modes that are accessed through the previous function.

9.8 EDIT PROGRAM:

9.8.1Select program – This function allows the user to select one of ten of the user defined built-in programs. This program is then accessed in “Function Mode” under “Program Run.”

9.8.2Edit program – This function allows the user to edit the built-in programs.

9.8.3Edit Scenes – This function allows the user to edit or define the actual scenes that are stored in the user defined built-in programs that are accessed in the previous step.

9.8.4Rec Controller - The Design Spot 575B features an integrated DMX recorder by pre-programmed scenes can be transmitted to the fixture via any standard DMX controller. This function allows those scenes to be stored in to the fixture’s built-in memory and then subsequently used to create user-defined programs.

©Elation Professional, Los Angeles CA. 31 Design Spot 575B™