Elation Professional 575B - page 13

Design Spot 575B™
©Elation Professional, Los Angeles CA. 13 Design Spot 575B™
at a time until the light is evenly distributed.
4. If the light is brighter around the edge than it is in the center, or if light output is low, the
lamp is too far back in the reflector. "Push” the lamp out by turning each of the
adjustment screws ("1, 2, 3”) counterclockwise. Turn until the light is bright and evenly
distributed throughout the beam field.
Please remember that a MSR 575 lamp is not a hot-strike lamp therefore, you must wait
approximately 15 minutes before you can attempt to strike the lamp once it has been turned
off.