Design Spot 575B™
©Elation Professional, Los Angeles CA. 28 Design Spot 575B™
the fixture will lock into the last DMX signal it received and remain in that position
until it is turned off or begins receiving a new DMX signal. If the fixture is turned
on without any DMX signal, the fixture will automatically go in to sound-active
mode. Available settings are: “Close” – Shutter flags will close. “Hold” – Fixture
will remain at it’s last settings. “Auto Program” – Fixture will go into stand-alone
mode, running the built-in program. “Music Co ntrol” – The fixture will go into
sound-active mode.
C. Pan Reverse - This function allows you to invert all pan movements. Use the Up
and Down buttons to turn this function On and Off. Press the Enter button to accept
the change or the Mode button to cancel and return to the main menu.
D. Tilt Reverse - This function allows you to invert all tilt movements. Use the Up and
Down buttons to turn this function On and Off. Press the En ter button to accept the
change or the Mode button to cancel and return to the main menu.
E. Fine resolution – This function changes the DMX channel operation from 8bit to
16bit.
F. Pan Degree – This function changes the maximum Pan resolution from either 540˚
or 630˚. The default function is 540˚.
G. Feedback – This function turns the feedback correction on or off. This function is set
to on as default.
H. Movement Speed – This function chan ges the order of the DMX channels to more
closely match similar fixtures from different vendors, thus allowing the user easier
functionality when programming. There are four different mode variations.
I. Mic Sensitivity – This function make the internal microphone more or less sensitive
to sound. This function only works in conjunction with the sound active modes. The
default setting is 70% and setting range from 0 % to 99 %.
9.4.2. Service Settings – These adjustments and settings should only be performed by a
technician familiar with the functionality this fixture. Incorrect setting of these