CAUTION FOR SAFE OPERATION
1.Water and Moisture
To prevent fire or shock hazard, do not expose this camera to rain or moisture.
2.Servicing
Do not attempt to disassemble or repair by yourself.
You may be exposed to dangerous voltage or other hazards. Note that all servicing is qualified service personnel. Modifications not approved by manufacturer could
void the user's authority to operate the equipment.
3.Power Sources
To prevent electric shocks and risk of hazards, do not use more than the specified power source.
4.Environment
Do not install too warm or too cold place. Recommended operation temperature is between
5.Sunlight
Do not point the camera at the sun. CCD can be damaged.
6.Heavy Shock and Vibration
Do not drop the camera or subject it to heavy shock of vibration.
7.Install on an Unstable Place
Do not place or install this camera on an unstable place, stand, tripod, bracket or table. That may cause serious injury to people or damage to appliance.
8.When operation is incorrect or a malfunction is observed While operating, if any abnormal condition (strange sound, smell or smoke) or a malfunction (no pictures, etc.) is observed, stop using the camera immediately, turn the power off, then contact your supplier.
9.Cleaning
Turn | the power off and wipe off the dirt with a dry soft cloth. |
If it is | extremely dirty, use furniture cleaner to wipe it off. |
To clean the lens, use a blower or lens cleaning tissue. (available from any camera dealer)
10. Do not shoot any source of bright light.
If the objects contain very bright areas, bright vertical or horizontal lines may appear on the screen. This is called "smear" , a Phenomenon which often occurs with solid - state pickups, and is not a malfunction.
11. Damage Requiring service
Unplug the camera from the power source and refer servicing to qualified service personnel under the following condition:
a.If the
b.If the camera has been exposed to rain or water.
c.If liquid has been spilled, or objects have fallen into the camera.
d.If the camera does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the camera to its normal operation. e. If the camera has been dropped or the cabinet has been damaged. f . If the camera exhibits a distinct change in performance.
Warranty is not covered in case of natural disaster or wrong Installation.
- 3 -