Honeywell HZC-855PX, HZC-855NX operation manual Fig5-7. WB Mode

⑧MAX FIELDS (option)

:Use for compensating the low illumination condition. In case that use this function because of low illumination condition, adjust maximum integration fields to get brighter and dynamical image. But the scene becomes slower than OFF mode. The larger max fields is, simultaneously the noise of image is larger. This is phenomenon because too small video output is integrated on many fields memory. To get more dynamical image, adjust maximum integration fields and set maximum AGC gain as HIGH, then make better the standard of dynamic image.

MAX FLDS	OFF → 2FLDS → 3FLDS → 4FLDS → 5FLDS
	→ 6FLDS → 7FLDS → 8FLDS → …. →
	→ 80FLDS → 160FLDS→ 320FLDS
☞caution	→ 510FLDS

1.In Fields Integration mode, noises as well as video information are increased. When an ambient temperature keeps high, CCD pixel defect happens to be larger and white. This is not due to failure.

<<SETUP MENU >> LENS MODE

AE MODE WB MODE NIGHTSHOT MODE BLC/WDR MODE PZM SETTING CAMERA ID SETTING SPECIAL FUNCTION FACTORY DEFAULT

<<WB MODE >>

MODEATW

CONTROL FRAME

RED GAIN	NOT USE
BLUE GAIN	NOT USE
RETURN

<Fig5-7. WB MODE >

5.7White Balance Mode

①White Balance Mode

:Outer illumination condition is expressed by Color temperature, Kelvin (°K). It is White Balance that shows white as white in any illumination conditions. It is composed of five modes..

ATW ( Auto Trace White balance )

:Trace automatically under any condition in range 2,800°K ~ 8,000°K ( It can be adjustable red and blue point of desired white position. )

AWB

:Consider current illumination condition, do white balance by force and lock as manual

INDOOR

: Use to set the preset illumination condition as 3200°K

OUTDOOR

: Use to set the preset illumination condition as 5400°K

MANUAL

: Use to adjust to desired RED, BLUE gain manually.

AWC

:Consider current illumination condition, do white balance by force and lock as manual

②White Balance Mode Control

:It displays and changes White Balance Mode Control status of Camera. ( According to Mode, it just display the state and not to adjust.)

ATW AUTO

INDOOR 3200°K OUTDOOR 5400°K

MANUAL	R/B CONT
AWC	LOCK → PUSH → . . . .
AWB	AUTO

(LOCK means Manual white balance status. Press NEAR(+) / FAR(-) key continuously, LOCK mode becomes PUSH mode and white balance acts automatically, and then white balance mode is locked as manual.)

- 15 -