JAI CV-M40 operation manual Binning mode SW1-4, Partial scan SW1-7, RS 232C interface SW1-7

CV-M40

7-1-2. Binning mode (SW1-4)

This switch selects the Binning mode.

OFF	:	Normal mode (60 frames/sec.)
ON	:	Binning mode (120 frames/sec.)

CAUTION

At the Binning mode, please note that vertical resolution would be lower (1/2 approx.) of normal mode.

7-1-3Ext. Ext.triggermode. OFFtrigger/readoutSwitchmodesSW1setting-(SW15(OFF-5, SW1:SW1-/ON6) -6:)ThesePulseEdgeswitchwidthpre-sselectcontrolthe ext. trigger/readout mode, as below.

Fram-delayreadout

7-1-4. Partial scan (SW1-7)

This switch selects the Partial scan mode. The effective number of lines can be set via RS 232C, or by jumpers.

OFF	:	Normal readout mode
ON	:	Partial scan mode

7-1-5. RS 232C interface (SW1-7)

This switch selects the RS 232C interface.

OFF	:	All functions can be set by switches and jumpers.
ON	:	RS 232C interface is activated.

16