Hitachi VM H 655 LA instruction manual Fade Button, PAL60 Button Multi Playback

Use this button to digitally process the image you are going to record or the playback image. During recording, you can select among six modes: 16x9, negative/positive, X400 digital zoom, half-mirRor, mosaic, or art ("Digital Effects Recording", p42).

During playback, you can select among three modes: 16x9, art, or sepia ("Video Effects in Playback Mode", p35).

26. FADE Button

The FADE button features six modes; white fade, wipe fade, mosaic fade, art fade, zoom fade and black-and- white fade ("Using Digital Fade," p44).

27. PAL60 Button (Multi Playback)

Use this button when connecting the camcorder to a PAL TV which handles PAL60 mode signal and has vertical sync adjustment circuitry for 60Hz.

Notes:

•Make sure "PAL60" is not displayed when connecting the camcorder to an NTSC TV for playback, or monitoring the playback picture on the camcorder's LCD monitor. If 'PAL60" Is displayed in the above cases, no color will appear in the picture.

•The PAL60 button is effective during playback only.

•See TV instruction manual for details about setting of PAL60 mode.

•Depending on the state of the tape recorded, the PAL60 button may not operate normally.

•Tape recorded on PAL system cannot be played back.

•The PAL60 mode will be released when the camcorder is turned off.

28. AudioNideo Output Jack (Behind the jack cover)

Use this jack to connect the camcorder to a television ("Connecting to a Television without Audio In and Video In

Jacks", p34).

]3