Note: !f your television has two (stereo) AUDIO IN jacks, Connect the audio plug to the leftichanne! AUDIO IN _ack.
2.Connect the other ends of the cable to the AUDIO OUT and VIDEO OUT jacks of the camcorder.
3.Insert a previously recorded cassette into the camcorder.
4.Turn on your television and set to the camcorder input mode (consult your television manual for details).
5.Hold down the red button on the CAM!OFF/VIDEO switch while sliding the switch to VIDEO.
I
6.Press the PLAY button to begin playback.
7.Press the STOP button when finished.
Connecting to a Television without Audio In and Video In Jacks
............ FJl
1.Disconnect the VHF antenna leads from the back of the television. Leave the UHF antenna leads connected.
2.Connect the VHF antenna lead to ANT IN of the RF output adapter. If the cable on the VHF antenna lead is flat you need to purchase an antenna adapter
3.Connect the
37