Hitachi VM H 655 LA instruction manual Prog

Advanced Techniques :-

1 Connect the edit remote control to the camcorder, and then connect the audio!video output cable as illustrated above.

I Note: If your VCR has two (stereo) AUDIO IN jacks, connect the audio plug to the left-channel AUDIO IN lack. 1

2 Insert a recorded tape into the camcorder.

3 Set the CAM/OFF/VIDEO switch of the camcorder to VIDEO. Turn the recording VCR on and select line input.

4 Press the PROGRAM button of the remote control. The program display appears in the viewfinder or on the LCD monitor.

PROG.	1 0:00:02
IN	:	:
OUT	:	:

I Notei If your VCR is connected to a TV, the pr0gram display Will DiS0 appear 0n the TV screen.

5 Press the _" button and use the _l_lor _1 button to search for the starting point of the segment you want to

copy. Press _" and then H to set the camcorder to the play pause mode.

The liner time counter counts when searching for the starting point.

Use the FORWARD and REVERSE buttons in the play or pause mode to fine adjust the tape position. Press FORWARD and hold it; the tape is played while the button is held. Press REVERSE and hold it for reverse play.

6 Press the IN button to store the counter reading. When you press the IN button, OUT flashes in the program display.

PROG. 1 0:15 : 13

IN 0:15 : 13

OUT : :

56