will automatically disappear.
5 Press the STOP button when you have finished.
Note: Decrease the sound volume of the camcorder when you play backa recording by Connecting the
camcorder to your TV, If the v01ume of the camcorder is set to maximum; the played back picture maybe distorted. Make sure that the volume is not set to maximum during recording as it could distort the played back
picture:ii.
Note: when the LCD monitor is turned on and left as it is, the monitor becomes warm, but this does not indicate a
Note: When the CAM/OFF/VIDEO switch is setto CAM or VIDEO, the LCD monitor is turned onand off automatical!y when the LCD monitor is opened and closed,
Note: It is recommended that you close the LCD monitor to save the battery power when playing back a picture on a TV without viewing it.
Note: On!y the playback sound is heard_ The sound being recorded is not heard,
Note: No sound is heard when the LCD monitor is closed.
To Play Back a Tape with the Viewfinder
Close the LCD monitor, then press the PLAY button to play back the tape. The picture appears in the viewfinder.
I Note: You cannot hear the playback sound When playing back your Video with the viev_inder. | 1 |
Using Still
To view a still picture during playback press the Start/Stop. Press the Start/Stop button again to resume playback. If you leave the camcorder in play/pause mode for more than 5 minutes the camcorder automatically stops the cassette to prevent damage to the tape. You can view a still picture with less noise on the LCD monitor (Clear still).
Note: The still picture will have several noise bars in the viewfinder and on the TV. Out this does not Indicate a fault.
Note: If you are freezing a picture with the LCD monitor closed, then you will not be able to view a still picture with 34