Overview of viewing, deleting and copying images
Basic image browsing
The large,
When you first turn on the camera, the display opens in standard browse mode, showing the last image taken (if any) for the current medium and batch. Likewise, after each new shot, the display shows a preview of the shot.
To browse the images of the current batch, simply press the left and right arrows of the navigator button.
Choosing the current batch
When you browse using the navigator button, you will only see images from the current batch on the current medium. To view another batch, you must navigate to it by zoom- ing out to the batch or media level and then zooming in on the appropriate folder. See Navigating Media and Batches for complete details about how to select the current medium and/or batch.
Browsing by approval status
It is possible to set the camera to browse only images of one or more specific approval levels from the current batch. You can use this, for example, to review all of your red- status shots to make sure you don’t need them or to review all of your
See Using Instant Approval Architecture for complete details about how to check and set the browse filter.
Zooming in and out
As illustrated below, you can use the 
or 
button to see various levels of detail in your images. You can furthermore zoom all the way out to view and select batches and media.
Media list | Batch list | Normal view | Zoomed | ||
|
|
|
|
| Continue to press (+) |
|
|
|
|
| to zoom further |
Zooming in for more detail
The preview display has a much lower resolution than your images. You can therefore zoom very far into the images to inspect small details. To do this:
24