Hasselblad 3034216 user manual Browse, To set the browse ﬁlter using the menus

Page 34

1



23

Browse shortcut !

There is also a one-button short- cut for changing the browse ﬁlter.

To use it, press and hold (do not click!) the Instant Approval but- ton until the approval status colour appears. Browsing will then only display the images with that classiﬁcation.

Browse

The browse ﬁlter complements the instant-approval system by enabling you to browse through images according to their approval status. You have the following choices:

•All: browses all of the images in the current batch, regardless of their approval status. This is the default.

•Red: browses only red-status images from the current batch. These are images that you have marked for likely deletion. You might browse these images to make sure you have not eliminated any usable images and/or to ﬁnd images that you can delete to make room for new shots.

•Green: browses only green-status images from the current batch. These are either new shots that did not trigger an exposure warning or shots that you manually assigned to green after overriding an exposure warning.

•Green & Yellow: browses green and yellow-status images, but does not show red-status images. These are probably images that you have either decided to keep or not yet checked for approval status.

For more information about using the instant-approval system, please see Using Instant Approval Architecture.

To set the browse ﬁlter using the menus:

1.Select the MAIN MENU > Browse entry. The current setting is displayed here.

2.Use the or button to step through the ﬁlter options (described above) until you have selected the ﬁlter you wish to use.

3.Either move on to another setting by using the navigator but- ton or press the menu button to exit the menu system and keep your setting.

The appearance of the ‘Empty Browse Filter’ message signiﬁes that there are no images with that particular approval status.

34

Image 34

Contents English, version N T E N T S Congratulations on your new Hasselblad CFV Reproducing skin tones and other diﬃcult colours accurately General Introduction Computer system requirementsBefore you start General overview Menu can be displayed in one of seven diﬀerent languages Parts, components & control panel buttons FireWire connector Battery not supplied Ready light indicatorDatabus connectors Battery retaining catchTo remove a battery Powering the digital backTo attach a battery FireWire connectionCFV can store captured images in three ways Shooting/image storage modesSelecting the current medium See Selecting the Current Storage Medium for detailsRemoving a card Using compact ﬂash memory cardsWorking with an Imagebank Working with a Hasselblad ImagebankRemoving from a computer Connecting to a computerTethered to a computer Shooting with FlexColor runningWhite Bal Media Browse Storage Settings GeneralSee later sections for more comprehensive information Setting the menu language Menu ShortcutsOrganizing your work with batches Navigating media and batchesBatch list Creating new batches Using Instant Approval Architecture Standard Instant Approval workﬂowReading and changing the approval status Browsing by approval statusSetting the default status Deleting by approval statusZooming in and out Basic image browsingChoosing the current batch Zooming in for more detailThumbnail views Choosing the Preview mode Preview ModesStandard preview display Using the histogramFull-details mode UnderexposureFull-Screen Mode Battery-saver modeOverexposure indicator Transferring to a computer Deleting images − generalTransferring / Copying images − general Transferring to an ImagebankMenu system overview Navigating the menu systemMenu structure Entries of the main menu Language To set the ISOWhite balance To select a preset white balanceMedia To set the browse ﬁlter using the menus BrowseStorage Press  to open the Delete dialog To delete a single imageSelect Main Menu Storage Delete Asked to conﬁrm the delete. Press OKDeleting several images from a batch To delete several images from a selected batchSetting by using the navigator button or ExitTo delete several images at once Button to cancelDeleting several images from a selected medium Select Main Menu Storage Delete. See alsoFormat To format mediaDialog. Press  to open the Copy dialog OK button to cancelPress the Menu button ButBatch To create a new batchDefault APPR. Level To change the default status assigned to each new imageSettings Main Menu Settings User Interface Entries of the User Interface MenuSetting the options under the User Interface menu Proceed as followsExposure Cable MAINMENUSETTINGSCameraModel setting variations For use with 503 CW modelsAll Hasselblad EL models Exposure Time Shutter DelaySetting Camera model and options Capture SequenceConnectivity diagram Press  to select Capture Sequence Setting Capture SequencePress  to open the Capture Sequence menu Press OK to conﬁrm all the settings Press either the or button to make an Initial Delay settingPress Start to set the sequence running Camera This setting UseSelecting an interface Disk  About boxSelect the Main Menu Settings Default entry MAINMENUSETTINGSDefaultTo reset all settings Press the OK button and then the Exit to returnPortable units TTL function 503CW onlyCleaning the CCD Infrared Filter Basic cleaning procedureCleaning with an E-Wipe Cleaning the housingsEquipment care, Service and Guarantee Technical speciﬁcations Image storagePage Sweden Product number Denmark