EverFocus IP 99 Series, EIP220, EVS110 user manual Video/audio setting

Page 19

IP99 series

Diagram 3.1 status information

3.2 Video/audio setting

Select 2. Video & Audio from the drop-down menu at top right corner, as shown in diagram 3.2:

Diagram 3.2 Video & Audio settings

Enable settings for video stream, snapshot, OSD, Record and Audio.

1）CBR setting: Set CBR enabled or disabled, default value is Disable. Note: CBR is fixed ratio.

18

Image 19

Contents IP 99 Series IP99 series About this document Safety NoticeSupport Terms and TrademarkMinimum Computer Requirements For example This web site may change without notices Table of Contents Frequently Asked Questions Name admin, password 11111111 then click OK. See diagram Install IP99 searcher in PCAssign New IP address optional Accessing the camera IP99 system operation Reset and Factory DefaultChange video resource Add more videosEdit and Change Display Layout Save layout settingEdit layout Single display zoom in/zoom out Zoom in/zoom outOperating buttons Integer zoom in/zoom outSnapshot Stop recordingPlayback PTZ control panel for Video Server only Right-click functions System settingIP99 series Status information System settingVideo/audio setting Device setting Alarm Event IP99 series Networking Pppoe setting Wireless LANSmtp setting Ddns settingFTP setting PTZ setting Date & Time settingAdministrator Special setting Change passwordMaintenance Have problem recording and playback on Windows Vista Frequently Asked QuestionsUSA N.Y. Office Head Office China OfficeUSA Office Europe Office