IP99 series
1. Starting the camera or video server
1.1 Install IP99 searcher in PC
Though you can simply enter 192.168.1.99 in IP address bar to access camera when you connect to only one IP99 device.( Default IP address is: 192.168.1.99 Port is: 80). However, it is recommended that you use IP search to manage IP camera and encoder. Please insert CD to install IP99 searcher tool. After finishing installation, click “IP searcher” icon to find IP99 encoders and cameras. Click “Search Again” to refresh list as shown in diagram 1.1
Diagram 1.1 Search IP device
1.2 Assign New IP address (optional)
The Default IP address is 192.168.1.99. You can change IP address through IP searcher. You don’t need to change IP address if you connect only one IP device. If you are connecting to multiplies of IP99 devices, please assign different IP address for different cameras For example, if you have 2 IP cameras, click “UpdateIP” to show old and new IP address. Then change to the IP address you want. Type default user
name: admin, password: 11111111 then click “OK”. See diagram 1.2
Otherwise, you can set camera as DHCP. Please refer to 3.6 network setting.
7