EverFocus IP 99 Series, EIP220, EVS110 user manual IP99 series

Page 22

IP99 series

selected area, click “Remove region”. Please refer to diagram 3.4:

Diagram 3.4 Alarm event

1）Motion detection event: No event, send JPEG file by e-mail or upload to FTP.

Note: When sending JPEG by e-mail or upload to FTP, file will be sent to the assigned e-mail adress.

2）Alarm I/O setting: Set Alarm Input/Output setting and status, as shown in diagram

3.5: Select Alarm input level high, low or no alarm for each AI alarm inputs. Different

alarm actions: send JPEG file by e-mail, load to FTP or no action can be selected. In Alarm Output table, the current status of AO1 and AO2 are shown. The output of AO1 and AO2 can be changed remotely by clicking High or Low button and do Save. AO1/AO2 will output 3.3V or 0V TTL level to the terminal.

Diagram 3.5 Alarm I/O setting

21

Image 22

Contents IP 99 Series IP99 series Safety Notice About this documentSupport Terms and TrademarkMinimum Computer Requirements For example This web site may change without notices Table of Contents Frequently Asked Questions Name admin, password 11111111 then click OK. See diagram Install IP99 searcher in PCAssign New IP address optional Accessing the camera Reset and Factory Default IP99 system operationAdd more videos Change video resourceEdit and Change Display Layout Save layout settingEdit layout Integer zoom in/zoom out Zoom in/zoom outOperating buttons Single display zoom in/zoom outSnapshot Stop recordingPlayback PTZ control panel for Video Server only System setting Right-click functionsIP99 series System setting Status informationVideo/audio setting Device setting Alarm Event IP99 series Networking Wireless LAN Pppoe settingDdns setting Smtp settingFTP setting Date & Time setting PTZ settingAdministrator Change password Special settingMaintenance Frequently Asked Questions Have problem recording and playback on Windows VistaEurope Office Head Office China OfficeUSA Office USA N.Y. Office