EverFocus EVS110, EIP220, IP 99 Series user manual Networking

Page 23

IP99 series

3.5 Networking

Set camera’s IP address, DNS setting, HTTP port information, as shown in diagram 3.6:

Diagaram 3.6 Networking

DHCP will automatically get the IP address. If you are not using DHCP, you can manually assign IP address and port.

Primary DNS server has to be the same as HTTP port set in IP address. Default HTTP port is 80.

22

Image 23

Contents IP 99 Series IP99 series About this document Safety NoticeMinimum Computer Requirements Terms and TrademarkSupport For example This web site may change without notices Table of Contents Frequently Asked Questions Assign New IP address optional Install IP99 searcher in PCName admin, password 11111111 then click OK. See diagram Accessing the camera IP99 system operation Reset and Factory DefaultChange video resource Add more videosEdit layout Save layout settingEdit and Change Display Layout Single display zoom in/zoom out Zoom in/zoom outOperating buttons Integer zoom in/zoom outPlayback Stop recordingSnapshot PTZ control panel for Video Server only Right-click functions System settingIP99 series Status information System settingVideo/audio setting Device setting Alarm Event IP99 series Networking Pppoe setting Wireless LANSmtp setting Ddns settingFTP setting PTZ setting Date & Time settingAdministrator Special setting Change passwordMaintenance Have problem recording and playback on Windows Vista Frequently Asked QuestionsUSA N.Y. Office Head Office China OfficeUSA Office Europe Office