EverFocus IP 99 Series, EIP220, EVS110 user manual Administrator

Page 28

IP99 series

Diagram 3.13 PTZ settings

Since IP address is the only fixed one, therefore PTZ address is set as “1”. Protocols are Pelco-D and Pelco-P which are in common use.

Note: When using Everfocus speed dome, user only needs to set the protocol as AUTO in order to control the speed dome.

3.13 Administrator

Add user, set user’s right, set maximum number of simultaneous viewers and change camera name, as shown in diagram 3.14:

27

Image 28

Contents IP 99 Series IP99 series Safety Notice About this documentSupport Terms and TrademarkMinimum Computer Requirements For example This web site may change without notices Table of Contents Frequently Asked Questions Name admin, password 11111111 then click OK. See diagram Install IP99 searcher in PCAssign New IP address optional Accessing the camera Reset and Factory Default IP99 system operationAdd more videos Change video resourceEdit and Change Display Layout Save layout settingEdit layout Zoom in/zoom out Operating buttonsInteger zoom in/zoom out Single display zoom in/zoom outSnapshot Stop recordingPlayback PTZ control panel for Video Server only System setting Right-click functionsIP99 series System setting Status informationVideo/audio setting Device setting Alarm Event IP99 series Networking Wireless LAN Pppoe settingDdns setting Smtp settingFTP setting Date & Time setting PTZ settingAdministrator Change password Special settingMaintenance Frequently Asked Questions Have problem recording and playback on Windows VistaHead Office China Office USA OfficeEurope Office USA N.Y. Office