EverFocus EPTZ3100I user manual Preset Tours

g. DEFAULT

ON: all settings in AUTOPAN menu will be returned to default values.

OFF: the setting in AUTOPAN menu is not default value.

h. RETURN

Turn joystick Left/Right to return to previous menu

3.5.2. PRESET TOURS

Press Enter key or turn the joystick Left/Right to enter PRESET TOURS sub-menu (see diagram 3.20)

AUTOPAN <┘
	<┘
PRESET TOURS
PATTERN <┘
AUTO RESUME		OFF
RESUME TO		POS.1(H)
POWER UP FUNC		PREV MODE
AUTO FLIP		ON
EXIT

TOUR NO. 1
	POS	DWELL	SPEED
1	PRE1<┘	DEFAULT	DEFAULT
2	PRE2<┘	DEFAULT	DEFAULT
3	PRE3<┘	DEFAULT	DEFAULT
4	PRE4<┘	DEFAULT	DEFAULT
5	PRE5<┘	DEFAULT	DEFAULT
6	PRE6<┘	DEFAULT	DEFAULT
7	PRE7<┘	DEFAULT	DEFAULT

PREV PAGE/NEXT PAGE RETURN

(diagram 3.20)

a.Tour NO.: Turn the joystick Left/Right to select tour number first

b.PRE: Turn the joystick Left/Right to select preset position. Press Enter key of keyboard to go next setting. Max. 16 positions can be set for a tour.

c.DWELL: Turn the joystick Up/Down to set dwell time of the tour from 1~99 sec or default.

d.SPEED: Turn the joystick Right after setting dwell time. Turn the joystick Up or Down to select tour speed from 1 ~255 or default. Press Enter key when you finish Tour

57