EverFocus EPTZ3100I user manual Alarm Outputs

3.6.2. ALARM OUTPUTS

Press Enter key of keyboard to enter ALARM OUTPUTS sub-menu. (see diagram 3.26)

ALARM INPUTS<┘

ALARM OUTPUTS <┘

MOTION DETECT <┘

EXIT

ALARM OUTPUT TRIGGER

OUTPUT NO 1

INPUT1YES

INPUT2YES

INPUT3YES

INPUT4YES

MOTIONNO SYSTEM ERROR NO

REMOTE NO RETURN

(diagram 3.26)

a.OUTPUT NUM: Select Output number from 1~2.

b.INPUT1: Select YES to enable Alarm input 1 for the alarm output selected. Select NO to disable Alarm input 1.

c.INPUT2: Select YES to enable Alarm input 2 for the alarm output selected. Select NO to disable Alarm input 2.

d.INPUT3: Select YES to enable Alarm input 3 for the alarm output selected. Select NO to disable Alarm input 3.

e.INPUT4: Select YES to enable Alarm input 4 for the alarm output selected. Select NO to disable Alarm input 4.

f.MOTION: Select YES to have alarm output triggered when a motion event is detected. Select NO to disable this function.

g.SYSTEM ERROR: Select YES to have alarm output triggered when system error occurs. Select NO to disable this function.

h.REMOTE: Select YES to have alarm output triggered when RS485 failure occurs.

63