EverFocus EPTZ3100I Cable Needed, Initial Setup, Power Cable, Video Cable, RS485 Cable

2.2. Cable Needed

Yellow RS485+

Orange RS485-

VIDEO

24VAC

Power Cable

An adapter with 24VAC/3.5A output provides the power to the EPTZ3100/EPTZ3100I. An extension power line may be needed.

Note: The input AC voltage range of an adapter depends on different area. Please make sure the voltage range before installing.

Video Cable

A BNC cable is used for connecting an EPTZ3100/EPTZ3100I to a DVR or a monitor. An amplifier may be needed if the video cable is too long.

RS485 Cable

Yellow wire represents RS485+, orange wire represents RS485-. Connect RS485 to EKB500 and you will be able to control the speed dome by a keyboard. If you are unable to control the speed dome with EKB500, it is probably due to a mis-connection. Please try to switch RS485 wires and connect again.

2.3. Initial Setup

Initial setup includes dome address, communication protocol, transmission speed, and

15