Acer s10 manual ShortCuts preferences, Setting up Phone preferences

12 Setting preferences for your Acer s10 ShortCuts preferences

6Tap OK.

7In the Confirmation screen, choose whether you want this configuration to be the default for your phone applications.

Setting up Phone preferences

Illustration suggestion (Delete this suggestion when completed): related

Phone pref screens

Use the Phone Preferences screen to select the connection profile you configured in the Connection panel. These settings will be applied when you use Phonebook access and voice applications.

1On the Phone Preferences screen, tap the Connection pick list.

2Select Infrared to GSM Phone or Serial to GSM Phone, according to your hardware setup.

The details of you connection should already be set up, based on what you picked in the Connection pick list. However, you can edit this information from this pick list.

If no connection methods are available, then None is shown in the pick list. This means that no phone drivers exist on your Acer s10. In this case you must install the phone driver on your computer then HotSync it to your Acer s10 .

If your phone is enabled and connected, you can test the connection by tapping on the Test button. This initiates a simple query of the phone to make sure the connection is working and the correct phone is being used.

ShortCuts preferences

You can use the ShortCut preferences to create Graffiti ShortCuts of up to 45 characters. For example, you could create a ShortCut for your name or for the header of a memo. All ShortCuts you create appear on the list in the ShortCut Preferences screen and are available in any of your Acer s10 applications. This list is backed up on your computer when you perform a HotSync operation.

For more information on how to use ShortCuts, refer to "Using Graffiti ShortCuts" on page 29.

294