Acer s10 Beaming an application, Beaming information Beaming a record, To beam an application

10 Beaming information Beaming a record

Beaming a record

To beam a record, business card, or category of records:

1Locate the record, business card, or category you want to beam.

2Tap the Menu icon .

3Tap Record.

4Choose from the following options:

•Tap Beam to beam an individual item.

•In the Address Book application only, tap Beam Business Card.

•Press the Address Book application button for about two seconds to beam your business card.

•Tap Beam Category (for records that are displayed in a category).

•Draw the Graffiti Command stroke to activate the toolbar, and then tap the Beam icon.

•Use the Graffiti Command stroke /B to beam the current entry.

NOTE: You can set the full-screen pen stroke to beam the current entry. Refer to “To change what the full-screen pen stroke activates” on page 271 for instructions.

5When the Beam Status dialog box appears, point the IR port directly at the IR port of the receiving handheld.

TIP: For best results, Acer s10 handhelds should be between 10 centimeters (approximately 4 inches) and 1 meter (approximately 39 inches) apart, and the path between the two devices must be clear of obstacles. Beaming distance to other Palm OS handhelds may be different.

When the Beam Status dialog box indicates that the transfer is complete, you can resume working on your Acer s10.

Beaming an application

To beam an application:

1In Applications Launcher, tap the Menu icon to display the menu bar.

2Tap App, and then tap Beam.

3Tap the application you want to transfer, and tap Beam.

250