Acer manual Creating a login script, To create a login script on your Acer s10

12 Setting preferences for your Acer s10 Network preferences

•If your IP address is permanently assigned:

–Tap the IP Address check box to deselect it.

–In the permanent IP address field, tap the space to the left of the first period, and enter the first section of the IP address using a number only, from 0 to 255.

3Enter the second, third, and last sections of the IP Address field by repeating the procedures above.

4Tap OK.

Creating a login script

A login script is a series of commands that automates logging into a network server, for example, your office LAN or your ISP. A login script is asociated with a specific service template created in Network Preferences.

You can create login script files in two ways:

•Ina text editor on your computer, in which you create a file with an extension pnc. You can then install this file in your Acer s10 using the Install Tool.

•In the Login Script dialog box, accessed from the Details dialog box in Network Preferences.

NOTE: Some commands, such as Send, require additional information and have a parameter field to add the necessary data.

You can also use non-ASCII and literal characters in your login script. Refer to "Using non-ASCII characters in login scripts" on page 289.

To create a login script on your Acer s10:

1With a service template selected in the Network Preferences screen, tap Details.

2In the Details dialog box, tap Script.

3In the Login Script screen, tap the End pick list.

287