10 Beaming information Receiving beamed information

NOTE: Some applications are copy-protected and cannot be beamed; this is indicated by a lock icon next to application icon.

4When the Beam Status dialog box appears, point the IR port directly at the IR port of the receiving device.

When the Beam Status dialog box indicates that the transfer is complete, you can resume working on your Acer s10.

Receiving beamed information

To receive beamed information:

1Turn on your Acer s10.

2Point the IR port directly at the IR port of the transmitting handheld to open the Beam Status dialog box.

3On the Beam Status dialog box, select a category for the incoming information, create a new category or leave it unfiled.

4Tap Yes.

5Wait for the Beam Status dialog box to indicate that the transfer is complete, and then tap OK to display the new entry.

NOTE: Incoming records, unless categorized, are placed in the Unfiled category.

Turning off beaming

To turn beaming on or off:

1In Applications Launcher, tap the pick list in the upper right corner of the screen.

2Tap Select All or System.

3Tap Preferences.

251

Page 269
Image 269
Acer s10 manual Turning off beaming, Beaming information Receiving beamed information, To receive beamed information