Listening to the Radio
DIRECT TUNING
TUNING DOWN/UP | Number buttons |
Number 
buttons
CLR 
FM AM TUNING MODE
TUNING
/
DIRECT
TUNING
AM Frequency Step Setup
(not North America and Europe)
You must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.
Use the receiver to perform the procedure below.
1 | While pressing the [AM] button, | |
press the [TUNING MODE] | ||
| ||
| button. |
Each press of the [TUNING MODE]
and button switches the frequency step setting between “10 kHz” and “9 kHz.”
2
Receiver
Press the [TUNING MODE] button so that the AUTO indicator appears or disappears from the display.
Auto Tuning
To activate this mode, press the [TUNING MODE] button to turn on the “AUTO” indicator. In this mode, you will receive the broadcast in stereo sound.
Manual Tuning
To activate this mode, press the [TUNING MODE] button to turn off the “AUTO” indicator. In this mode, you will receive the broadcast in monaural sound.
Release | After the desired frequency step is | |
displayed, release the [AM] button. | ||
the button | ||
|
|
Listening to AM/FM Stations
With the
3
Receiver
Press the TUNING [
DOWN] or [UP 
] button.
You can also use the remote controller’s TUNING [
]/[ ] buttons to tune the radio.
Auto Tuning
Searching stops when a station is found.
Manual Tuning
The frequency stops changing when you release the button.
1
Receiver
Use the [FM] or [AM] input selector button to select AM or FM.
In this example, FM has been selected.
Band Frequency
(Actual display depends on country.)
Press the buttons repeatedly to change the frequency one step at a time.
25
