ResMed 3I user manual SETTING UP YOUR HUMIDAIRE 3i FOR USE

Models: 3I

1 91
Download 91 pages 7.56 Kb
Page 11
Image 11
SETTING UP YOUR HUMIDAIRE 3i FOR USE

SETTING UP YOUR HUMIDAIRE 3i FOR USE

WARNING

! Make sure your flow generator is switched off at the power outlet before connecting the HumidAire 3i.

REMOVING THE FRONT CAP (IF FITTED)

Please refer to the illustrations in section B of the illustration sheet.

Your flow generator may be fitted with a front cap (B-1). Before you can attach the HUMIDAIRE 3i, press the button underneath the front cap (B-2)and pull it away from the body of your flow generator (B-3 & B-4).

Notes

To replace the front cap, align it with your flow generator (B-4)and push it firmly until it clicks into place.

Remember to take the front cap with you when travelling, in case you need CPAP therapy without a humidifier.

REMOVING AND STORING THE CONNECTOR PLUG

Please refer to the illustrations in section C of the illustration sheet.

Before attaching the HUMIDAIRE 3i, remove the connector plug from your flow generator (C-1)and attach it to the back of the docking station (C-2).

ATTACHING YOUR HUMIDAIRE 3i

Please refer to the illustrations in section D of the illustration sheet.

1Align your HUMIDAIRE 3i with your flow generator (D-1)and push them together until they click into place (D-2).

WARNING

! The HumidAire 3i docking station should only be connected or disconnected when the water chamber is empty.

Water must be prevented from entering your flow generator. Do not transport the flow generator with the HumidAire 3i attached.

2Insert the power cord into the socket at the rear of your flow generator. Plug the other end of the power cord into a power outlet (D-3).

Note: If your flow generator is powered via the DC input, the HumidAire 3i is not powered and humidification output will be reduced.

3Place the combined unit on a firm, level surface near your bed at a level lower than your sleeping position. Ensure the surface is not sensitive to heat and/or moisture, or use a protective mat.

CAUTION

! Be careful not to place the unit where it can be bumped into and knocked over.

6

Page 11
Image 11
ResMed 3I user manual SETTING UP YOUR HUMIDAIRE 3i FOR USE