TECHNICAL SPECIFICATIONS
PERFORMANCE
Maximum heater plate temperature: 185°F (85°C)
Temperature
Maximum output humidity: 95% relative humidity (control dial set to maximum setting, flow rate 50 L/min, ambient temperature of 68°F [20°C], ambient relative humidity of 40%).
Maximum gas temperature: 106°F (41°C)
DIMENSIONS (H X W X D)
Docking station and water chamber: 4.6" x 6.7" x 8.3" (118 mm x 170 mm x 212 mm)
WEIGHT
Docking station and unfilled water chamber: 1.5 lb. (670 g)
Water capacity to maximum fill line: 415 mL
POWER SUPPLY
Input range for ResMed S8 flow generator with HUMIDAIRE 3i:
Actual average power consumption will vary, depending on factors such as temperature setting, set pressure, the use of accessories, height above sea level and ambient temperature.
Maximum heater element power: 85 W.
HOUSING CONSTRUCTION
Docking station: Flame retardant engineering thermoplastic, plated cast aluminium.
Water chamber: Injection molded plastic, stainless steel.
ENVIRONMENTAL CONDITIONS
Operating temperature: +41°F to +104°F (+5°C to +40°C)
Operating humidity:
Storage and transport temperature:
Storage and transport humidity:
IEC
ELECTROMAGNETIC COMPATIBILITY
Please refer to your flow generator user's manual for details.
Note: The manufacturer reserves the right to change these specifications without notice.
ENGLISH
TECHNICAL SPECIFICATIONS | 15 |