Enjoying Audio Sources—Continued
SLEEP DIMMER
PHONESDIMMER
(Other than European model)
MUTING
Muting the receiver (remote controller only)
You can temporarily mute the output of the receiver.
Setting the Display Brightness
You can adjust the brightness of the display.
1 |
| Press the remote controller’s |
| [MUTING] button. | |
|
| |
|
| The receiver is muted. |
|
| To unmute the receiver, press the |
|
| [MUTING] button again. |
|
| Note: |
|
| The Mute function will be cancelled if |
|
| the remote controller’s VOLUME |
|
| buttons are pressed or the receiver is set |
|
| to Standby. |
1 Remote controller
Receiver
Press the remote controller’s [DIMMER] button repeatedly to select: dim, dimmer, or normal brightness.
Alternatively, you can use the [DIMMER] button on the receiver (other than European model).
Using Headphones
You can connect a pair of stereo headphones
Using the Sleep Timer (remote controller only)
With the sleep timer, you can set the receiver so that it turns off automatically after a specified period.
1 | Press the remote controller’s | |
[SLEEP] button repeatedly to | ||
Remote |
| controller | select the required sleep time. | |
|
| You can set the sleep time from 90 to 10 | |
|
| minutes in 10 minute steps. | |
|
| The SLEEP indicator appears on the | |
|
| display when the sleep timer has been set, | |
|
| as shown. The specified sleep time appears | |
Notes: |
| on the display for about 5 seconds, then the | |
| previous display reappears. | ||
• Always turn down the volume before connecting your |
| SLEEP indicator | |
headphones. |
| ||
|
| ||
• Sound output from speakers is not turned off even if |
|
| |
(when) the headphones plug is inserted in the |
|
| |
PHONES jack. To turn off or on the sound output from |
|
| |
speakers, use the SPEAKERS A and SPEAKERS B | To cancel the sleep timer, press the [SLEEP] button | ||
buttons. | |||
repeatedly until the SLEEP indicator disappears. | |||
| |||
| To check the remaining sleep time, press the [SLEEP] | ||
| button. Note that if you press the [SLEEP] button while | ||
| the sleep time is being displayed, you’ll shorten the sleep | ||
| time by 10 minutes. |
21