Onkyo TX-8255 Turning On the Receiver, Turning On and Standby, Changing the Input Display

Turning On the Receiver

ON/STANDBY

STANDBY/ON STANDBY indicator

Turning On and Standby

1		Press the [ON/STANDBY] button.
		Alternatively, press the remote
	Receiver
		controller’s [STANDBY/ON]
		button.
		The receiver comes on, the display
		lights up, and the STANDBY indicator
	or	goes off.
	Remote
	controller
		To turn the receiver off, press the
		[ON/STANDBY] button, or press the
		remote controller’s [STANDBY/ON]
		button. The receiver will enter Standby
		mode. To prevent any loud surprises
		when you next turn on the receiver,
		always turn down the volume before
		you turn it off.

Changing the Input Display

You can change the input display name to “HDD”. When the input display name has been changed “HDD” for TAPE 1, the display name for the other button cannot be changed to “HDD”.

After you changed the input display name, you can operate the RI Dock using the remote controller supplied with the receiver (see pages 10-11).

1	Press the appropriate input
	selector button.
	The selected input name appears in the
	display.
2	Press and hold down the input
	selector button selected in the
	Step 1 above for approximately 3
	seconds to change the display
	name.

19