Connecting Your
Connecting aTV or Other Component with an Audio Output
Use an analog audio cable to connect the LINE 1/DVD IN L/R or LINE 2 IN L/R jacks to the analog audio output jacks on the connected component.
When you connect a VCR, the video input from the VCR should be sent to the TV directly.
IN
L
R |
With 
(Remote Interactive), you can control your 
with the receiver’s remote controller.
•To use
, you must make an analog audio connection between the receiver and each audio component.
Receiver
connector
L 
R
AUDIO
OUT
Connecting 
Components
If you connect other Onkyo components to the receiver
with the appropriate 
and audio cables, you can use
the following system functions.
cables are special
cables solely for use with Onkyo products (no
cables are supplied with the receiver).
Auto Power On
When you turn on the power or start playback on a component that’s connected to the receiver, the receiver will turn on automatically. And when you set the receiver to Standby, all connected components will go on Standby as well (the receiver’s POWER switch must be set to ON for this to work).
Direct Change
When playback is started on an audio component
connected via
, the receiver will automatically select that component as the input source.
Remote Control Operation
You can control all components in your system by using the receiver’s remote controller. See pages
Onkyo CD player,
etc.
connector
Onkyo cassette |
|
deck, etc. | connector |
Remote Interactive |
| Remote control cable |
Dock, etc. |
| |
|
|
Notes:
•Push each plug in all the way to make a good connection.
•Use only dedicated 
cables for 
connections
(no 
cables are supplied with the receiver).
•
jacks should be connected only to Onkyo components. Connecting them to another manufacturer’s component may cause the receiver to malfunction.
•Some components may not support all 
functions. See the manuals supplied with your other Onkyo components for more information.
17
