Specifications
Amplifier Section
Rated Output Power (FTC) (North American)
All channels: | 50 watts minimum continuous power |
| per channel, 8 ohm loads, 2 channels |
| driven from 20 Hz to 20 kHz, with a |
| maximum total harmonic distortion of |
| 0.08 % |
Rated Output Power (IEC) (European and Australian)
2 ch ⋅ 90 W at 4 ohms, 1 kHz, 1 ch driven Maximum Output Power (JEITA) (Asian)
90 W at 4 ohms, 1 kHz, 2 ch driven
Dynamic Power
North American: 135 W + 135 W (2 Ω) 105 W + 105 W (4 Ω)
70 W + 70 W (8 Ω)
European and Australian:
110 W + 110 W (2 Ω)
90 W + 90 W (4 Ω)
55 W + 55 W (8 Ω)
THD (Total Harmonic |
|
Distortion) | 0.08 % (Power Rated)/ 0.08 % (1 kHz, |
| 1 W) |
Damping Factor | 60 (Front, 1 kHz, 8 Ω) |
Input Sensitivity and |
|
Impedance | 150 mV/ 50 kΩ (LINE) |
| 2.5 mV/ 50 kΩ (PHONO MM) |
Output Level and |
|
Impedance | 150 mV/ 2.2 kΩ (REC OUT) |
Frequency Response | 10 |
Tone Control | ±10 dB, 100 Hz (BASS) |
| ±10 dB, 10 kHz (TREBLE) |
Signal to Noise Ratio | 100 dB (LINE, |
| 80 dB (PHONO, |
Speaker Impedance | 4 |
Tuner Section
■FM
Tuning Frequency
RangeNorth American: 87.5 MHz– 107.9 MHz
Others: 87.5 MHz– 108.0 MHz
■AM
Tuning Frequency
RangeNorth American: 530 kHz–1710 kHz
Others: 522 kHz–1611 kHz
Preset Channel | 40 |
General
Power Supply | North American: AC 120 V, 60 Hz |
| European: AC |
| Others: AC |
Power Consumption | North American: 2.1 A |
| European: 180 W |
| Others: 180 W |
Standby Power |
|
Consumption | North American: 0.2 W |
| Others: 0.3 W |
Dimensions |
|
(W ⋅ H ⋅ D) | 435 ⋅ 149 ⋅ 340 mm |
|
|
Weight | 7.5 kg |
| 16.5 lbs. |
■Audio Inputs
Analog Inputs | PHONO, CD, TAPE 1, TAPE 2, LINE 1, |
| LINE 2 |
■Audio Outputs
Analog Outputs | TAPE 1, TAPE 2 |
Speaker Outputs | SPEAKERS A |
| SPEAKERS B |
Phones | 1 |
IR Input/Output | 1/1 |
Specifications and features are subject to change without notice.
33