EverFocus EPTZ3100I user manual Diagram

In zone menu, you can set a zone and name it, when the speed dome turns to the zone you set, it will display zone name on the screen (only if “OSD/AREAS->Display -> Zone” is set as “YES”). Turn the joystick to Up/Down to select the character. Turn the joystick Left or Right to select the character position. Once the title is inputted, turn the joystick Left/Right to go “Range” section, and press Enter key to enter Range sub-menu. Use the joystick to move speed dome to its left position. Press IRIS+ key to save left position setting and go to next step or press IRIS- to cancel.

ZONE
TITLE	RANGE	CLR
1.		[<┘]
	--------<┘
2. ----------------------------	--------<┘[<┘]
3. ----------------------------	--------<┘[<┘]
4. ----------------------------	--------<┘[<┘]
5. ----------------------------	--------<┘[<┘]
6. ----------------------------	--------<┘[<┘]
7. ----------------------------	--------<┘[<┘]
8. ----------------------------	--------<┘	[<┘]

RETURN

ZONE1

MOVE TO LEFT POSITION IRIS+: SAVE AND NEXT STEP IRIS-: CANCEL

(diagram 3.10)

Use the joystick to move speed dome to its right position. Press IRIS+ or IRIS- key to save and return.

ZONE1

ZONE1

MOVE TO LEFT POSITION IRIS+: SAVE AND NEXT STEP IRIS-: CANCEL

MOVE TO RIGHT POSITION IRIS+/IRIS-: SAVE AND

RETURN

(diagram 3.11)

49