EverFocus EAN800AW user manual Audio, Microphone is not available for U.S. region

Page 27

EAN800A/EAN800AW

4.5 Audio

The EAN800A/EAN800AW camera can transmit audio to other clients using a built-in microphone or connecting to external microphone to play audio received from other clients via connected speakers. This section describes how to configure the basic audio settings.

Audio

Check Enable Audio box to enable audio function.

Audio Input: Audio from an internal microphone or a line source can be connected to the Audio connector of EAN800A/EAN800AW. The audio source can be selected from Internal Microphone, External Audio Input L and External Audio Input R.

Note:

Microphone is not available for U.S. region.

Audio Input volume: Adjust the Audio Input Volume for the audio input devices connected to the camera if there are problems with the sound input being too low or high.

Press Apply to apply the setting changes or Reset to reset without saving the change.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents EAN800A/EAN800AW EAN800A/EAN800AW About this document Safety NoticeTerms and Trademark SupportAbout AC Adaptor Table of Contents Introduction Accessing the Camera Menu EAN800A/EAN800AW EAN800A/EAN800AW Information System Info2 Log User Config EAN800A/EAN800AW Network NetworkGateway IP TypeIP address Subnet MaskHttp Port PasswordEAN800A/EAN800AW Secondary DNS UsernameDdns Bandwidth SMTP/FTP EAN800A/EAN800AW Network Alarm reserved for PowerCon Wireless EAN800AW Multi Streaming VideoEAN800A/EAN800AW Camera Image settingEAN800A/EAN800AW Microphone is not available for U.S. region AudioUser Event EventEAN800A/EAN800AW EAN800A/EAN800AW Motion Alarm Time Mask Date/Time SystemEAN800A/EAN800AW Daylight Saving SD Card Indication Description Maintenance EAN800A/EAN800AW Specifications Environmental USA N.Y. Office Head Office China OfficeUSA Office Europe Office
Top Page Image Contents