EAN800A/EAN800AW
4.7.2 Motion
Motion Detection
User can define the motion area to be detected by left clicking the mouse to draw lines. Every click is an end point of the line. When the detection area is formed, double click the mouse to have all the lines connected. To remove the selection, simply right click the mouse, the selected polygon will be deleted.
Press 
to update the current image.
Press 
to have the entire screen selected for motion detection.
Press 
to clear all selections.
Press 
and click on the polygon, to erase that polygon.
There are 5 motion trigger areas, which can be distinguished by 5 different colors. Check Enable checkbox to enable event action.
For each of them, you can set the event action to be activated. Event action can be set in “Event” section.
Moreover, you can set the Sensitivity level for motion triggered by selecting from 1 (low), 2, 3, 4, 5, 6, 7, 8, 9 to 10 (high).
32